At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The 4-digit code to program a universal remote to work with a RCA LED32B30RQ TV model is likely to be one of the following:
11447 11758 11442
To program the universal remote to work with the RCA LED32B30RQ TV:
Turn on the TV
Press and hold the "Setup" button on the universal remote until the "TV" button blinks twice.
Press the "TV" button on the remote.
Enter the 4-digit code for your TV using the number buttons on the remote.
Press the "Power" button on the remote. The TV should turn off.
Press the "Setup" button again to lock in the code.
If the TV does not turn off after entering the code, please try the other codes listed above. If none of the codes work, you may need to refer to the universal remote manual or contact the manufacturer for further assistance.
Note: The method to program the universal remote may vary depending on the remote brand and model
If you are lucky with a universal it MAY OR MAY NOT EVEN PROGRAM--BEST bet would be original remote which will turn set on even if the power button is destroyed.
With a universal you enter a code and hit power, keep entering possible codes one at a time and hit power each time until the set either comes on or runs out of possible codes for the set.
Note: some of the remotes (universals) have a search mode where you can try every possible code one at a time (usually up to around 50 codes)
Again, Universal remotes are hardly universal in the sense that they will always be missing key features---if you have the old remote and it does not work--that is usually fixable.
Here you go. This will work with most all universal remote controls. If you don't have the code do the following: Automatic Programming With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device. Although this method can be more time-consuming, it eliminates the need to look up codes and enter them manually.
1. Turn off the device with which you want to use the remote control.
2. Press and hold the corresponding button on the remote control (TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. It should take a couple of seconds for the light to remain solid. The remote control is in programming mode.
3. Press and release power button. The POWER INDICATOR flashes once and stays on indicating the unit is in Power Scan mode.
4. Press CHANNEL up or CHANNEL down repeatedly until the device turns on.
5. When the device turns on, press OK to store the code.
Note: • To exit without storing the code, press BACK. • T he unit will search for the next code or the previous code if you press CHANNEL up or CHANNEL down after the device turns on. (go slow you need to press OK when the TV turns on) if you mess up turn TV off and start over. 6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.
Fill free to ask me questions about anything..........................
At this moment TV has to be ON (turn tv on by front panel)
3. continue with remote control pushing power button again and again and again SLOWLY
4. when the tv turns off then press enter to save your code.
Ok I just got a new universal remote so I have a paper with all the codes. For the Brooksonic the code is 0932 and to program it press the set up button on the top of the remote, then press either the TV, DVD, or VCR button (which ever one you want to use) and then enter the code in. It should work, but I have been trying to program mine for a while now and I cant get it to work, so if anyone can help me out that would be great. I have the code to mine and the instructions, I just cant get it to work!
turn on item you want programmed.press set up.press button for item on remote.press power button up to 300 times slowly until tv ect... turns off.hit enter this should work
×