I need a pilot kit for my instaflame propane stofe FS30

If this is a thermocouple standing pilot it more than likely is not sensing the thermocouple. Try to sand down lightly the thermocouple and try to light again.

Electrode might need cleaning , pilot might need a clean , electrode might be out of position.

does it turn without being pushed in?

In order to turn the knob to the pilot position you need to push the knob in slightly and then turn. Once the pilot position on the knob is lined up with the indicator on the valve, you can push it in and gas will flow to the pilot assembly.

Hi there!
You need to order a gas valve conversion kit (from nat to propane), propane pilot orifice and propane burner orifice,
Gas valve conversion kit consists of a replacement spring thicker than of natural gas valve spring, gas valve cap and a sticker.
Pilot orifice for propane has smaller bore than of natural.
Burner orifice for propane has also smaller bore than of natural burner orifice (one for each burner).
You will be able to find these parts on the list of Pitco Distributor when you visit http://www.pitco.com
Regards.

Hi there!
You will be needing a gas valve conversion kit (nat to propane),
propane pilot orifice and burner orifice (depends on number of burners).
You will find these parts awhen you visit http://www.pitco.com
Regards.

Buy a kit from nat gas to propane in saying that some fireplaces come with both kits .

change injector in pilot and the injector in main burner and the spring in the reg on the fire place , This info should come with the converstion kit

Hi there.

Burner orifice size for propane gas is number 55. You have to replace all burner orifice with this size if you want to use the fryer with propane gas. Pilot burner orifice should be replaced with propane pilot orifice.The gas valve spring should also be replaced with propane spring kit. The difference between the two spring is the natural gas spring is lighter or thinner compare with the propane gas valve spring.

Regards.

check the supplier for the conversion kit.the kit contains burner orifice, pilot orifice and gas valve spring which are commonly needed for conversion from propane to natural gas or from natural gas to propane.
****natural gas orifice has larger bore than propane, gas valve spring for propane is thicker than for natural gas.

dear,

check this link and hope it will help you

globaltowne.com/manuals/125FX_English_12_yr.pdf

regards,