Paper feed messed up won't print.

Baja Data / Jay Arias-Chavez

• 317 Answers
• Posted on Oct 15, 2008

SOURCE: HP2600 LAser printer wont print red

Here is the link to the step by step procedure, it requires a little skill to do so... enjoy!

http://forums11.itrc.hp.com/service/forums/bizsupport/getattachment.do?attachmentId=296504&ext=.pdf

SOURCE: Photosmart 8750 carriage jammed error and skewed printing

SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray.
Make sure that the product is turned off. 
Disconnect the USB cable from the back of the product.
Disconnect the power cord from the product.
Disconnect the power cord from the electrical outlet and wait 10 seconds.
Reconnect the power cord directly into the electrical outlet and check for the following.
Make sure that the power cord used is the one provided with the product.
If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet.
Make sure that the power cord is firmly connected to both the product and the power supply.
Reconnect the power cord to the back of the product.
Press the power button ( ) to turn on the product.
Reconnect the USB cable to the back of the product.
If the issue is resolved, proceed to Step six: Print a self-test page.
If the issue continues, proceed to the next step.

for more information please go to below link>>

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458822&cc=us&lc=en&dlc=en

Thanks for using FixYa.

SOURCE: Feed paper light stays on, and paper doesn't feed through

hi im josh in cebu phils. friend if it stays lighted on and cartrdge move side to side. ther problem is in your paper feeder it wont detec the paper because maybe it is already covered with dirt and dust. try to clean it. good lcuk

efs_perpends

• 1997 Answers
• Posted on Jul 03, 2009

SOURCE: HP Photosmart C6280 Will not feed paper correctly

Please onsult this HP support article and follow the steps outlined there to clean the rollers, etc. Frequently this roller cleaning and possibly a reset is all that's required to clear the jam error. (If you have access to compressed air, you can gently blow air throught the printer to clear out paper dust and debris from inside.
Also be sure to follow the instructions in the manual or here to load the paper correctly, fan sheets before loading, and if the problem continues, try flipping the stack of loaded paper upside down and reloading, or try another kind of paper..

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

SOURCE: hp laserjet p3005dn tray1 manual feed problem

you can choose mp first in "paper handing" printer menu or print tray1 is A4 default in properties of printer software.