How to turn off text clicking - Motorola Mobility RAZR V3

found it,

when texting click on the double arrows directly below the text window.
Then click on the wrench,
then click on "language and settings".
select your language then click "keyboard input".
uncheck everything except for "Keyboard"
also click on"Auto-Selection" and turn it off
also click on "word Completion" and turn it off.
Enjoy your texting!

Hello Kafshar,

Open the phone and click the Menu button. Note the center keypad above the numerical keys can click up, down, left and right.

Click the center keypad left until you see the "Messaging" option.
Click "New Message."Click "Text Message."


Enter the telephone number of the person (or people) you wish to send the message to. You can also select people from your contact list by clicking "Add" and then clicking "From Contacts." Select the contacts you wish to text by clicking "Mark" and then click "Done" when everyone has been selected.

Click down until you are in the "Text" box. Type in the message you wish to send. Click "Send."

Best Regards

7 Click "Send."

Read more: How to Send a Text Message on a Verizon LG Phone ' eHow.com http://www.ehow.com/how_4507209_send-text-message-verizon-lg.html#ixzz1SJrC2aPQ

4 Click "TXT Msg."

Read more: How to Send a Text Message on a Verizon LG Phone ' eHow.com http://www.ehow.com/how_4507209_send-text-message-verizon-lg.html#ixzz1SJpjpNht

3 Click "New Msg."

4 Click "TXT Msg."

5 Enter the telephone number of the person (or people) you wish to send the message to. You can also select people from your contact list by clicking "Add" and then clicking "From Contacts." Select the contacts you wish to text by clicking "Mark" and then click "Done" when everyone has been selected.

6 Click down until you are in the "Text" box. Type in the message you wish to send.

7 Click "Send."

Read more: How to Send a Text Message on a Verizon LG Phone ' eHow.com http://www.ehow.com/how_4507209_send-text-message-verizon-lg.html#ixzz1SJpdc0HK

2 Click the center keypad left until you see the "Messaging" option.

3 Click "New Msg."

4 Click "TXT Msg."

5 Enter the telephone number of the person (or people) you wish to send the message to. You can also select people from your contact list by clicking "Add" and then clicking "From Contacts." Select the contacts you wish to text by clicking "Mark" and then click "Done" when everyone has been selected.

6 Click down until you are in the "Text" box. Type in the message you wish to send.

7 Click "Send."

Read more: How to Send a Text Message on a Verizon LG Phone ' eHow.com http://www.ehow.com/how_4507209_send-text-message-verizon-lg.html#ixzz1SJpK1pFN

Do this:

1.Select the text you want in Landscape orientation.
2.Click the Page Layout tab on the Ribbon.
3.Click the arrow in the lower right corner of the Page Setup group.
4. In the Apply To list box, select Selected Text or, if you want the entire document, select Whole Document.
5.Click OK.

Or, if you don't want all the text on the page turned, do this:

1. Insert a table with enough columns to enable you to isolate your vertical text in its own column.
2. Put the text in that column.
3. Right-click in that column and select Text Direction.

Now you can turn that text while the rest of the page stays horizontal. You can turn off the table cell borders so they don't print and no one will know the difference.

Hope that helps.

Log into your Sprint account on the web,

Click the "SMS Messaging" link in My Online Tools, then click the "Settings & Preferences" link in Text Messaging Options.

If that doesn't help, just call Sprint (or whoever your carrier is) customer service and they can turn off incoming SMS messages.

Show All Hide AllDo one of the following:
Add body or title text

• Click inside a text placeholder (placeholders: Boxes with dotted or hatch-marked borders that are part of most slide layouts. These boxes hold title and body text or objects such as charts, tables, and pictures.), and type or paste the text.

Note If your text exceeds the size of the placeholder, Microsoft PowerPoint reduces the font size and line spacing incrementally as you type, to make the text fit.
Add text to an AutoShape

• To add text that becomes part of the shape and moves when you move the shape, select the AutoShape (AutoShapes: A group of ready-made shapes that includes basic shapes, such as rectangles and circles, plus a variety of lines and connectors, block arrows, flowchart symbols, stars and banners, and callouts.) and start typing.
• To add text that is independent of the shape and does not move when you move the shape, add a text box (text box: A movable, resizable container for text or graphics. Use text boxes to position several blocks of text on a page or to give text a different orientation from other text in the document.).
  1. On the Drawing toolbar (toolbar: A bar with buttons and options that you use to carry out commands. To display a toolbar, click Customize on the Tools menu, and then click the Toolbars tab.), click Text Box .
  2. Do one of the following: Add text that stays on a single line
     
     • On the slide, point to where you want the text box, click, and then type or paste your text.
       
     Add text that wraps
     
     • On the slide, point to where you want the text box, drag the text box to the size you want, and then type or paste your text.
       

Note To add text to a line, connector, or freeform (freeform: Any shape you draw by using the Curve, Freeform, and Scribble tools. Freeform shapes can include straight lines and freehand curves. They can be drawn opened or closed and can be edited.) AutoShape, you must add text using a text box.
Add text to a text box

1. On the Drawing toolbar (toolbar: A bar with buttons and options that you use to carry out commands. To display a toolbar, click Customize on the Tools menu, and then click the Toolbars tab.), click Text Box .
2. Do one of the following: Add text that stays on a single line
   
   • On the slide, point to where you want the text box (text box: A movable, resizable container for text or graphics. Use text boxes to position several blocks of text on a page or to give text a different orientation from other text in the document.), click, and then type or paste your text.
     
   Add text that wraps
   
   • On the slide, point to where you want the text box (text box: A movable, resizable container for text or graphics. Use text boxes to position several blocks of text on a page or to give text a different orientation from other text in the document.),drag the text box to the size you want, and then type or paste your text.
     
   I hope this helps
   

This usually occurs after an Internet Explorer upgrade. I spent days banging my head against the wall searching for solutions, when I stumbled across this. It fixes the problem every time.

WinFax PRO hangs or shuts down
- during installation
- when prompting for a phone number/CSID
- editing a phonebook entry
- adding/editing an IP address, or setting up Host Sharing

The problem started occuring after installing Internet Explorer 7/8.


SOLUTION:

1. In CONTROL PANEL, Click on REGIONAL AND LANGUAGE OPTIONS

2. Click on the LANGUAGES Tab.

3. Under "TEXT SERVICES AND INPUT LANGUAGES" Click on the DETAILS button.

4. Click the ADVANCED Tab.

5. Under System Configuration, enable the option "Turn off advanced text services" (Put the CHECK mark in this box.)

6. Click OK.

7. Restart the computer and then try WinFax PRO / TalkWorks PRO again. Number entry should now work in WinFax.

8. Now go back to the control panel following the steps above and undo step 5, un-check the option "Turn off advanced text services."


Note

• To open Regional and Language Options, click Start, click Control Panel, click Date, Time, Language, and Regional Options, and then click Regional and Language Options.

• Use this procedure to turn off handwriting recognition, speech recognition, and some accessibility features temporarily. These services can affect performance, and if you are not using them with your current program, you can turn them off temporarily.

• If you are not using a text service at all, you should remove it.

• Turning off text services does not affect multiple languages or keyboards that you have added under Installed services on the Text Services and Input Languages dialog box.

1. Click the Printer and Paper tab.
2. Under Paper, in the Size box, select Letter.
3. Click OK.
4. Do one of the following:
   • If your design is a picture, clip art, or WordArt, flip it horizontally.
   How?
   
   1. On the Arrange menu, point to Rotate or Flip.
   2. Click Flip Horizontal.
   • If your design includes text in a text box or table, turn it into a picture first, and then flip it horizontally.
   How?
   
   1. Select the text in the text box or table in your design.
   2. On the Edit menu, click Cut.
   3. On the Objects toolbar (toolbar: A bar with buttons and options that you use to carry out commands. To display a toolbar, click Customize on the Tools menu, and then click the Toolbars tab.), click Insert WordArt .
   4. Under Select a WordArt style, click a style, and then click OK.
   5. Press CTRL+V to paste your text into the WordArt Text box.
   6. Format the text, and then click OK.
   7. If necessary, resize the WordArt, or use the WordArt toolbar to format it, and place it in the design.
   8. Select all the objects in the design, including the WordArt.
   9. Click Group Objects .
   10. On the Arrange menu, point to Rotate or Flip, and then click Flip Horizontal.
5. Print your design on plain paper first to make sure it looks the way you want it to.
6. Make any adjustments to your design after seeing the test printout.
7. Make sure thermal t-shirt transfer paper is in the printer.
8. On the File menu, click Print.
9. Select the options you want.
10. Click OK.

Source

Cheers

Hi
Open yahoo>go to the top right side of yahoo mail>click on options>select mail options and then go to the left side and select Signature.

To turn off automatic spelling corrections and all automatic formatting:

1. On the 'Tools' menu, click 'AutoCorrect'
   
2. Clear the 'Automatically correct spelling and formatting as you type' check box.
   

Tip: To specify options for checking spelling, on the 'Word' menu, click 'Preferences', and then under 'Authoring and Proofing Tools', click 'Spelling and Grammar'.
----------------
To turn off automatic capitalization and text corrections:

1. On the 'Tools' menu, click 'AutoCorrect'
   
2. Click the 'AutoCorrect' tab, and then clear the check boxes for the options that you want to turn off.
   

Tip: To turn off automatic spelling corrections as you type, clear the 'Replace text as you type' check box.

1) Open the Control Panel2) Double-click on Regional and Language Options (if you are in Classic View) 
or Double-click on Date, Time, Language, and Regional Options in Category View


3) Click on the Languages tab, then click on Details



5) Click on the Advanced Tab
6) Finally, place a checkmark in the box "Turn off advanced text services" and Click Ok



The language bar next to the System Tray should disappear, and CTFMON.EXE will unload from memory.

If you wish to bring back the language bar, simply follow the procedure above and UNCHECK the box to turn off advanced text services.

Microsoft has more information and a Frequently Asked Questions document about CTFMON.EXE, click on the link below to review it.

Frequently Asked Questions about CTFMON.EXE

Therefore, CTFMON.EXE is not a virus or a piece of malware, but its also not a program that you NEED running, expecially if you don't use Microsoft Office XP applications.