How to fix body control module in 2007 dodge ram 1500

Dodge Ram 1500/2500 (2002-2009) fuses

Fuse Box Diagrams https://fuse-box.info > dodge > dodge-ram-1500-2500...

Fuse box diagram (location and assignment of electrical fuses) for Dodge Ram / Ram Pickup 1500/2500 (2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009).

Not good fuses to blow. you need to find out why?

31
31 10 or 15 amp except SRT (2006) (15A): Shift Motor and Mode Sensor Assembly (ETC), Powertrain Control Module (Gasoline);

2007-2008 (10A): Powertrain Control Module;

2008-2009 (15A): Powertrain Control Module


4
40 20amp
Base: Power Outlet - Instrument Panel, Power Outlet - Lower Console (2007-2009)
Here are your dash warning lights. The lightning bolt is Electronic Throttle Control, and you can't drive without that. Not sure that your sail and sun is unless it is the Cold Ambient Derate Mode Indicator
You need a local auto electrician. you can't guess stuff like this, it needs a pro grade scan tool computer.

https://www.google.com/search?q=auto+electrician+near+me

..

Question edited for clarity and spelling of 'module'.
Question moved to model category.
No reason given for wanting to know where it is.

What's the ram 1500 bcm location?

Vehicle History https://www.vehiclehistory.com > questions > whats-th...
6 answers
For the 2015 Ram 1500, the BCM (body control module) can be found on the driver's side of the car. It is located in the fuse box. If for any reason the BCM .

More here

https://www.ramforumz.com/threads/body-control-module.277957/

https://www.youtube.com/watch?v=RcjBUdL1ZoA

Remove all the LED bulbs and it will fix it. The LED bulbs contain a low voltage computer circuit board. Information from your bulbs is fed back to the Body Control Module BCM. The BCM doesn't understand the strange information it is getting back from the bulbs. Your flashing is controlled by a computer module.

2008 Dodge Ram Flasher Relay

https://www.ramforumz.com > ... > Electrical
Jun 26, 2011 - There is no "flasher" per se. The turn signal and hazard lighting controls include the TIPM (Totally Integrated Power Module) and EMIC.

From off position turn ur key on then off three times ur problem codes will flash on ur odometer this atleast a place to starat

your air bag control module needs to be changed

have battery tested if good fully charge,then check all relays and fuses.

The ignition and timing are controlled by the PCM computer.

check supply voltage of integrated power module, as well as BCM- body control module located at passenger compartment left side of instrument panel

You may have a problem with the IOD fuse not being installed or blown. I may also be the forward control module, or what may be referred to as the body control module.

Much easier to replace the switch assembly. If it is something minor repair it but do not open the switch assembly packaging so that you can return it.