Here is a link to the service manual for your unit. Look for section on programming unit identification for the remote.http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCsQFjAA&url=http%3A%2F%2Fwww.quietside.com%2Fclassic%2Fdownloads%2FService%2520AQV18_24%2520JAKCV.pdf&ei=uwh1U5PpNM6iqAaHr4DQCA&usg=AFQjCNEAs6FdSrr1lSDgNuNZ_9zvmycdKA&sig2=pILXHK1-yJa9ugqScI1evw&bvm=bv.66699033,d.b2k
SOURCE: I have a split system
Replace receiver board or if you have a spare unit try to transfer the receiver board to the defective one and test the remote to confirm the unit problem.
SOURCE: THE MONITOR OF INDOOR UNIT DISPLY ALL THE
This could be caused by a blown circuit breaker or fuse inside the unit, a damaged compressor or fan motor, faulty wires connecting the compressor or fans to the control board unit, a faulty or hung relay on the control board (this can sometimes be solved by tapping the relay with a screwdriver), or the starter capacitor for the compressor or fan motor.
SOURCE: i start my as 12 samsung ac with the remote or
If you look carefully at the remote there is a reset button, try resetting it and make sure you have new batteries.
183 views
Usually answered in minutes!
×