How can I reset a Toshiba E3511 copier back to factory defaults?

SOURCE: Need help disabling Toshiba 3550 sorter

I don't have operational sorter, but I can locate one for you if you are interested. Now, the solution to you copier is for you to go into the service mode and change the setting from sort to non-sort. This is the step you need to take. Go to the Service mode by doing the following.

1. Turn of copier
2. Push on 08 then Power on copier
3. enter 4 then
4. Push Print
5. Change the current value from 1or 2 to become 0
6. Push or press Interupt to reprogram the copier.
7. Then enter 09 to get out of the service mode.

Good luck.

SOURCE: Check the Color Toner Cartridge

Try to take out all the color toner.. And start the machine... If machine can startup properly, it will ask u to insert toner one by one...

PS: What is your current print counter?

SOURCE: Toshiba Estudio 350

I have an e-studio 350, we lost power and when the power came back on it went to call for service mode. I tried to tun it off and unplugged the unit but it still came up with same call for service mode. Unfortunately I dont have the money for a service call and would hope that there is a simple solution. can anyone help???

SOURCE: Toshiba 451c Color Copier experiencing error F105

Hi how are you this is jack my personal Id ([email protected])

Dear follow the procedure .....
Other service call

[F105] HDD other error
(1) Check if the connectors of the HDD are disconnected.
(2) Check if the connector pins are disconnected or the wires of harnesses are open circuited.
(3) Perform the bad sector check (08-694). If the check result is OK, recover the data in the HDD. If
the check result is failed, replace the HDD.
(4) Replace the SYS board.
Thanks
Best Regards,

SOURCE: factory reset toshiba copier

Factory reset is not available on this copier....
To get rid of the settings, u can format the HDD...
But if u want to clear the meter counter....it needs combination of codes in order to do that....which is highly confidential.....