Sony KP-51HW40 51" Rear Projection Television Logo

Related Topics:

A
Anonymous Posted on May 18, 2014

Where can I find a lamp for kp-65ws500 - Sony KP-51HW40 51" Rear Projection Television

1 Answer

jose527

Level 1:

An expert who has achieved level 1.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 2 Answers
  • Posted on Dec 06, 2014
jose527
Contributor
Level 1:

An expert who has achieved level 1.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jun 26, 2008
Answers
2
Questions
7
Helped
178
Points
4

You can go to www.PartStore.com enter you model#

2 Related Answers

Anonymous

  • 211 Answers
  • Posted on Jan 06, 2008

SOURCE: kp-65ws500 RED

Sounds like a Cathod Short in the red CRT. May also be a CRT Board or a Video Chip heating up. To check for heat problems I use a canned agent called freeze spray. You can spray it on the boards and if the problem quits, the problem is in that board, then isolate it to a component ( transistor, chip capacitor etc). Good luck
Ed
NC Electronic
Mills, Wyoming

Ad

Anonymous

  • 201 Answers
  • Posted on Aug 28, 2010

SOURCE: how do i find the

The 2 chips are on a large metal heat sink near the back of the tv. They will be on the opposite side and will have stamped on them (example) STK392-560. You may also have a blown pico fuse (look like a solid colored resistor part number on board will be like (example) ps8001, you'll need a meter to check if any are open or not most times they are. RepairKits This website will take you to a place to buy the parts you need to fix it. good luck.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Sony KP-65WS500 TV shuts off by it self....after I turn it back on, a minute later it goes off again.

The 8 blinks means its a High Voltage error which mean ur D- board is bad it'll be T8005.
0helpful
1answer

Getting rainbow of red lines as well as red dominance in picture

i Guess the lamp is at the verge of it's life change the lamp!! it cost's abt 250$
0helpful
1answer

My kp-65ws500 rear projection 65' tv has sound but no picture... i opened the back and the bulbs dont turn on.

your tv is protecting itself ( please be very carefull becouse you are dealing with very high voltage aprox. 28000 or more volts its deadly my advise is to take it to your service center
1helpful
1answer

Replacement Lamps/Bulbs for Philips 50P8341 Rear Projection TV

These are both CRT type TV's(3 picture tubes drive the image) with different screen sizes and the CRT's are not interchangeable
2helpful
1answer

How do I replace the lamp in my 65' sony rear projection TV

Sony KDP-65WS550 is rear projection TV that has 3 picture tubes inside. Let me know what bulb you are asking for help?
It is not DLP TV that has ballast Lamp for back light.

0helpful
1answer

Double image ( Ghost image )on Sony KP-65WS500

Replacing the Convergence ICs should fix the problem. They are located on the Deflection board. Sony has used a couple of different ones over the years I think they are STK-392-120's but please do not hold me to it.
Hope this helps,
Skyassoc
2helpful
1answer

KP_65WS500 Tube numbers

Here is the part number for the blue tube B 07MVC61, the Red is R 07MVC61, and the Green is G 07MVC21. The number to contact the company that makes the tubes is 1-800-241-5005 Ext 143
2helpful
2answers

Massive Convergence problems even after replacing IC's.

Hi,
See a pico fuse HERE and find PS8001 to PS8006 on D board of TV
Not finding what you are looking for?

86 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...