Question about Samsung Dv5471agp 27" Front-load Gas Dryer

1 Answer

DV5471AGP dryer will not stay running even on air fluff HE error code

HE error code will not stay running. even on no heat setting

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,554 Answers

You need to check the gas supply
and venting system for any problems clogs etc
there is a detection circuit just for these and its very sensitive

Posted on May 19, 2014

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dr comes up wont start


dr is door error
this generation of dryer has alot of control board failures(the relay for the heat burns the terminals for the wires)
you can inspect these relay connection visably by removing the front control panel

you might want to try setting the machine to the fluff/air dry setting and try starting the dryer, if it starts in air fluff you need to check the connections on that relay
this is not a factory taught test.
its just something a customer pointed out one time and i have tried on many after the fact, and for whatever reason these machines will still run in fluff mode when the board is gone.
25354666-u40lsvyytnuesyuv3fbafhtd-1-0.jpg

Jan 04, 2015 | Washing Machines

1 Answer

I have a Samsung DV218AEW Electric Dryer that continues to heat during cooling cycle. Have replaced heating coil, all 4 thermostats, cleaned out all duct work, checked the blower for blockages but...


At this point I'd complain to the company as it sounds like a fire hazard. Check to see if there has been a recall on it, but I wouldn't turn it on and leave the house. It is not your fault......it is a manufacturers defect...at least that is my opinion.

Feb 04, 2014 | Samsung DV218AEW Electric Dryer

1 Answer

My LG Tromm electric dryer won't heat - again.


if the high limit is popping the dryer is getting to hot,i know you say you checked the vent line but i've heard that before,when i get out i remove the vent from the back of dryer,change out the t-stat and run it with the vent line off and it runs fine,how long is the vent line?if it's a long run remove it from the back of dryer and stick a leaf blower into it,blow it out to the outside and see what comes out,also first run it on air fluff,if this is a newer dryer set it to timed dry and then you can set it to air fluff,go outside and feel how it blows,then after you blow it out check it again,if you see alot of lint blow out and it's blowing harder your all set,you should take the dryer apart and clean it and the vent line once a year and you won't have any problems like this,also you won't have to worry about a dryer fire,your clothes will dry on time and less parts will have to be changed out,also when you get it to heat again run it on air fluff,if it gets hot on air fluff you have a shorted heater,one of the coils are touching the metal box on the heater and the heater won't shut off,also you have to clean out the duct where the lint filter slides down into,if this is blocked the dryer can't push the air out the blower wheel is blocked with lint.hope this helps you out happy holidays

Dec 25, 2017 | LG Tromm Electric Dryer

1 Answer

I have a frigidaire gallery series front loading electric dryer model # 134509400c.press start and it beeps with a dr code.any idea what is causing this?


dr is door error
this generation of dryer has alot of control board failures(the relay for the heat burns the terminals for the wires you can inspect these relay connection visably by removing the front control panel you might want to try setting the machine to the fluff/air dry setting and try starting the dryer, if it starts in air fluff you need to check the connections on that relay this is not a factory taught test.its just something a customer pointed out one time and i have tried on many after the fact, and for whatever reason these machines will still run in fluff mode when the board is fried

Oct 22, 2011 | Frigidaire Electric Dryer

1 Answer

Heating element stays on, even at fluff air no heat setting. Replaced high limit thermostst and thermistor Air flow good


If your heating element is grounded (wire burnt in half and is touching metal) the heat will stay on forever, even in air fluff. This is your most likely problem.

Feb 18, 2011 | Dryers

1 Answer

The screen keeps flashing dr when i try to start it whats going on the DooR is closed not sure what else dr stands for


dr is door error
This generation of dryer has alot of control board failures(the relay for the heat burns the terminals for the wires) you can inspect these relay connection visably by removing the front control panel you might want to try setting the machine to the fluff/air dry setting and try starting the dryer, if it starts in air fluff you need to check the connections on that relay
this is not a factory taught test.
Its just something a customer pointed out one time and i have tried on many after the fact, and for whatever reason these machines will still run in fluff mode when the board is fried

Feb 15, 2010 | Frigidaire Electric Dryer

3 Answers

The dryer is heating on air fluff.


Good Afternoon,
Is this dryer Electric or Gas?

Mar 27, 2009 | Whirlpool LER4634J Electric Dryer

1 Answer

Sde5401ayw keeps tripping breaker


ck the element if the breaker poping as soon as you use heat dead short eather element are wire going to it

Mar 18, 2008 | Maytag SDE5401AYW Electric Dryer

1 Answer

Dryer starts, then stops, beeping 3 times.


Seems that the most likely problem is that it is overheating and triggering safety cut out. Most likely reason is that the airflow is somehow blocked. Check filtering and air entry and outlets for blockages, lint build up etc..

May 27, 2007 | Kenmore 63932 Electric Dryer

Not finding what you are looking for?
Samsung Dv5471agp 27" Front-load Gas Dryer Logo

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Paul

Level 2 Expert

381 Answers

Eric Rotmil
Eric Rotmil

Level 3 Expert

587 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...