When I boot copier on the LCD screen freezes at begginning when it says "wait..." I turned off and still gets stuck at wait... Please advise on how to get that not to freeze?
Hi im jules_09,theres a problem with the copier because ussually after turning it on it warms up for seconds or a minute,but when it freeze at wait the warm up time is too long,see if if you can get the error code,if there is a error code it the lcd check how long is its warm up time.if it take too long.if you can repair it check the voltage at the power supply board going to the main logic board.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Oct 2, 2014 - 5 posts
I have rebooted twicw but it just stays stuck at the welcome screen. ... next page in the first column , under "I need help immediately" you need to ...
Aug 15, 2015 - 3 posts
Inkjet Printing; LaserJet Printing; Printer Software and Drivers; DesignJet .... Windows 10 Stuck on Welcome Screen ... It is a great place to find the help youneed, both from other users, HP experts and other support personnel.
Feb 23, 2015 - 2 posts
My new desktop gets stuck On the welcome page. ... Also you need to uninstall and reinstall the problem software on your ... Hope this helps.
? 4:36
https://www.youtube.com/watch?v=HErn0-GcQqE
Jan 4, 2014 - Uploaded by My Tablet Guru
If your Android tablet is stuck on startup or boot screen, then bypass it ... 1) Press the volume up or volume down or home button when the tablet start, .... is support on my tab . its also stoc on android logo plz bro help me . .... How to fix most tablets if they freeze - Duration: 2:21. by JunkyBlake 236,241 views.
You need to do a factory reset by holding down the power and the volume (-) down button at the same time until u see a black screen with Command prompts.. After this use the volume up and down buttons to stroll up and down and the power button to select.. Go down to data factory reset and press select then select yes.. And your tablet should reset itself.. This May or may not work on the first try.. Please wait at lease 5 minutes for it to boot up because it will take a while to boot after this so don't get all frustrated. If it's still stuck at the go logo just go back to step 1 and repeat.. This is what I did for my tmax 9 tablet when it was stuck at the go logo.. It didn't work the first ten for me but for the 2nd factory wipe it did the trick..
Hello there, i just owned a brand new Asus T100 for 2 days and today on the 3rd day after purchasing, i faced problems during boot/start up where the laptop gets frozen on the Asus logo screen.
I tried holding down the power button for 10 seconds and turned it on again. It ran a series of windows software updates before the start up, then after all software updates have been completed, the laptop resumed to freeze at the Asus logo screen again. I tried holding the power button for 10 secs followed by holding the power button and volume up button at the same time, to get into automatic repair/repair mode. THIS HELPS, get into the repair mode!
To cut it short, i tried the other advanced options as well as the restart button in the repair mode but to no avail. After carefully reading the different options in the 'advanced options' in repair mode... Here's what worked for me:
1) If you're stuck at the Asus logo screen which doesn't seem to boot for ages or at least 10 minutes, hold down the power button for 10 seconds and let the screen turn black. (I did this with my charger plugged in, not too sure if it matters)
2) Count to 10 seconds. Switch the laptop on by HOLDING THE POWER BUTTON + VOLUME UP BUTTON at the same time. This will send the laptop into an 'automatic repair', followed by a 'diagnosing this PC' and after which you will see a blue screen which is the repair mode.
3) On the blue screen you will see 2 buttons, 'Restart' and 'Advanced Options'. Click on 'Advanced Options'. (DO NOT CLICK RESTART, it does nothing as you will get stuck again at the logo screen)
4) After clicking 'Advanced Options', click 'Advanced ....' (i forgot what exactly) and click 'STARTUP REPAIR'. This is the crucial part.Then follow whatever the system promts you.
5) Afterwards, it will attempt to repair your system then lead you back to the logo screen for startup.
6) Wait a few minutes and you should be able to get to your login screen as usual.
Hope this helps. I chanced upon it by guessing which would actually help me.
Try these steps: 1) Turn off your laptop 2) Pull the Battery out 3) Turn the laptop on 4) If it does the same thing, put the Battery back in and reboot it
Doing this may reset the Bios and get your PC booting back into Windows. Please let me know if this helps! --Andrew
Try to replace the LCD inverter in your laptop. Most common issues on LCD are due to failing LCD inverter. It fails more often than LCD cable or LCD backlight does.
Please let me know if this solution helped to resolve your issue.
Try resetting the PRAM by turning on the iBook then holding option + command + P + R and wait till u hear another chime. If it still freezes, it may indicate an application may be causing it to lock up hold shift after you hear the chime to boot OS X into safe boot.
×