The printer tell me incert black printer cartidge in right stall. or photo cartidge. I've install the cartide but print does not reconized the installation.

HP Officejet 7200, 7300, and 7400 All-in-One Series - 'Incorrect Print Cartridge' or 'Insert Print Cartridge in...Stall' Message Displays on the All-in-One After Installing a Cartridge Issue After installing a cartridge, the error message Incorrect Print Cartridge or Insert [Black or Photo / Tri-color] print cartridge in [right / left] stall appears on the product control panel. Solution Follow these steps to resolve the issue. Step one: Remove, inspect, and reseat the cartridge The cartridge might not have full electrical contact with the product. Removing and reinstalling the cartridge might help. NOTE: HP cannot guarantee the quality of remanufactured or refilled cartridges. Use genuine HP cartridges to ensure good quality.

1. Make sure that the product is turned on. NOTE: Press the power button ( ) to turn on the product.
2. Open the product cover and wait until the carriage is idle and silent.
3. Open the cartridge latch.
   1. Press down lightly on top of the latch.
   2. Pull out the bottom of the latch to unhook it.
4. Slide the cartridge out and inspect it. Figure 1: Open the cartridge latcThe printer tell me incert black printer cartidge - c00211535.gifc="/uploads/images/c00211535.gif" alt="c00211535.gif" class="h_mi" /> Open the caThe printer tell me incert black printer cartidge - c00211536.gif Figure 2: Slide out the cartridge Slide out the cartridge CAUTION: Do not touch theThe printer tell me incert black printer cartidge - c00211537.gifrical contacts or the ink nozzles. Figure 3: Copper electrical contacts and ink nozzles 1 - Copper electrical contacts 2 - Ink nozzles Electrical contacts and ink nozzles
   1. Check the copper electrical contacts for debris. If any debris is evident, proceed to "Step two: Clean the cartridge and carrThe printer tell me incert black printer cartidge - c00211538.gif."
   2. Make sure that the clear nozzle protective tape has been removed. Figure 4: Remove the clear nozzle protective tape 1 - The clear nozzle protective tape Remove the clear protective tape CAUTION: Do not try to remove the copper electrical strip.
   3. Look at the number on the cartridge label and make sure it is compatible with the product. Compatible cartridges are listed in the product user guide.
5. If the cartridge is not compatible, obtain the correct cartridge, and then go to "Step five: Replace the cartridge." If the cartridge is compatible, reinstall it in the product:
   1. Hold the cartridge with the nozzles down and the copper electrical contacts facing the product, and then slide the cartridge into the carriage.
      • Cartridges marked withThe printer tell me incert black printer cartidge - c00211539.jpgo into the left carriage slot.
      • Cartridges marked with a square or pentagon go into the right carriage slot.
      Figure 5: Insert the cartridge into the correct slotThe printer tell me incert black printer cartidge - c00211540.gif="/uploads/images/c00211539.jpg" alt="c00211539.jpg" class="h_mi" /> Insert the caThe printer tell me incert black printer cartidge - c00211541.gifthe correct slot
   2. Push down on the cartridge latch until it snaps closed.
   Figure 6: Slide the cartridge Slide the cartridge into the slot Figure 7: Close the latch Close the cartridge latch
6. Close the product cover.