Why does my 2002 projecter tv have to much red in it

Hello,

Projector TV's have a tube for each function e.g. Video 1, Video 2, TV. Does the TV just not work or the VCR<DVD<Game console modes not work as well? If one works and the others do not you should be able to replace that tube, module, piece.

I hope this helps.

The Problem you are having is a Cathode to Grid Short in the Red CRT,When it Shorts the screen will Go all Bright Red and shut Down,The Best fix Would Be to Replace the Defective CRT (GUN)

power light if it shuts down should blink a error code--count the blinks and a pause?


SD TECH

2) STK392-120 ICs and 4) 6.8 ohm 1 watt metal-oxide resistors.

The sony convergence repair kit Type 1 from www.tvrepairworld.com should repair that issue. The kit comes with the instructional CD on how to install the repair kit.

Unplug,replug the tv back an hour later.The tv should reset itself.More problems repost,see if i can help u.

Set is 7yrs old look for cracked board.

Replace Both of your convergence ICs they are big black ics STK392-110? use 180s .

The model number is KP-53HS30, the screen is blurry displayin colors of red green pink

If the picture is playing fine and you notice that the background is getting more and more red, until it is too red and the set shuts down, it could be that the red screen control is set just a bit too high. If this is the case, you can probably correct this yourself. If you are watching a perfect picture and then it suddenly flashes a very bright red, with thin red lines in the pictureand then shuts down, it usually means that the red picture tube has developed a short in it, between the cathode and heater. A good tech might be able to remove the short by arcing, but if the short persists then the red tube will have to be replaced. Either way, this is something that should only be done by a qualified tech.