LG WM2455 Front Load Washer Logo

Related Topics:

A
Anonymous Posted on May 27, 2014

I have a lg wm2455h front loader sometimes i have to play with the power button to get it to start

4 Related Answers

Anonymous

  • 632 Answers
  • Posted on Jan 02, 2010

SOURCE: LG Washer WM2455H Tub Clean Problem

Yes, it's normal. It is a safety feature because of the hot water used during the tub clean cycle. It prevents the machine from opening while the tub clean cycle is in process.

Ad

Anonymous

  • 12 Answers
  • Posted on Dec 04, 2010

SOURCE: LG washer WM2455H The start button does not work,

Unplug the washer for 5 minutes to see if the commands for the cycle will reset. Also try pressing the stop button for ten seconds.

Anonymous

  • 2605 Answers
  • Posted on Feb 26, 2011

SOURCE: Having problems with the start button on my LG

Hello,

welcome to FixYa,

Could you possibly elaborate on the issue with the LG washer you have, what is the issue with start button ?

Also if you could verify the model number is indeed a WM2688H it will save possible mis-understandings.

Thank you for choosing FixYa today, I'll watch for your reply.

Regards,

Macmarkus :)

Anonymous

  • 51 Answers
  • Posted on Jun 04, 2011

SOURCE: why does my lg front loader washer wm-1832cw

you have either a hall senser /stator/or main board/problem.... may even be a voltage issue. check your recepticle see if its good. easy first check plug to see if its been arking on the plungs

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Lg front loader m 80490 cl clear error

If you're experiencing an error on your LG front loader M80490CL washing machine, here are some steps you can try to clear the error:
  1. Power off the washing machine by unplugging it or turning off the circuit breaker that powers it.
  2. Wait for a few minutes to let the washing machine cool down.
  3. Press and hold the "Start/Pause" button for about five seconds.
  4. While still holding the "Start/Pause" button, turn on the washing machine by either plugging it back in or turning the circuit breaker back on.
  5. Release the "Start/Pause" button once the washing machine begins to beep and the display shows "CL" to indicate that the error has been cleared.
  6. If the error persists, refer to the troubleshooting section of the washing machine's user manual or contact LG customer support for further assistance.
1helpful
1answer

Door on front load LG WM2455H* seems stiff when opening now. Works sometimes fine and other times starts then stops and I get dE code. Happening more often now but not all the time.

On ur model soap and softener can drip down on door hinge on inside of front panel of unit. It 'rusts' the hinge and causes it to be hard to pivot. That also puts extra pressure on the door lock mechanism and sometimes misaligns the closing. The hinge double pivots. Sometimes taking front off and lubricating the hinge will free it.
0helpful
1answer

My wm2455h turns on by itself and after some time, it turns off. What is causing this>

It seems that the Main Control Board of your washing machine is playing up. The fact that when you unplug the machine from the mains, the main control board resets itself and you are able to start the machine points in this direction.
0helpful
1answer

Why won't My LG True Steam Front loader washing machine will not start

Have you tried "resetting" it by unplugging it for 10 minutes then plugging it back in? Sometimes a power surge confuses the electronics and a power down for a while allows it to reset itself.
0helpful
1answer

I have a LG WD 1238C Front Loader Washing Machine and the display has a CL on it.

Remove power for some time , allow the power to drain off the memory and see if the display is clear. If not hold the start button and switch on power. Check the inlet and drain filter , free water flow, if not remove and clean.
0helpful
1answer

I have LG Tromm WM2455H front loading washer. After finishing a load of clothes, the door did not unlock. When you push the power button there is 3 clicks at the door latch. When you push it again to turn...

The problem may be with the lock itself. Check to see if there is any signs of wear at the lock and lid assembly. Post back your findings and I will look for a service manual for your unit.

Regards,Richard
1helpful
2answers

LG washer WM2455H The start button does not work,

Unplug the washer for 5 minutes to see if the commands for the cycle will reset. Also try pressing the stop button for ten seconds.
3helpful
1answer

LG Washer WM2455H Tub Clean Problem

Yes, it's normal. It is a safety feature because of the hot water used during the tub clean cycle. It prevents the machine from opening while the tub clean cycle is in process.
0helpful
1answer

Front door does not release

press the pause/ play button. This will unlock the door
3helpful
3answers

LG Front Loader WD-8074FHB

sometimes you just have to force the door but first try hitting the machine near the door lock sometimes this helps the door interlock may be stuck in the closed position
Not finding what you are looking for?

215 views

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...