Washer is filled with water,,it wont drain,,nor

So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?

Might have strings or coin in the pump.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

The draining problem could be something stuck in the pump. A easy fix just take it apart and get whatever is in it out of there. The agitator sits atop an agitator drive block. The spline on these tends to strip out. Yank off the agitator (it just snaps on) and replace the drive block.

SERVICE MANUAL

My page shows more HERE

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

The lid switch is fine. The timer needs to be replaced.

The electric motor my have failed or a part called a capacitor could be the problem? The capacitor is part of the starting circuit of the electric motor, if this fails the motor will not start therefore the washing machine won't spin or agitate.

Hi, Do you know if the washer spins at all?
It sounds like the coupler has gone bad.
Please let me know if it spins at all.
I can send yyou instructions on changing the coupler.

Vic

If it will not spin/drain/advance timer or make any noise when you set it to do these options your problem is the lid switch. Your washer thinks the lid is up so it wont run as a saftey measure. You can order and install this item and its pretty easy and very common.

if it's making a loud buzzing noise while its suppose to be agitating or spinning its the motor coupling

Could you describe the noise you are hearing. This will help to determine what to look for.

if it wont drain , check your lid switch, check out your motor coupler, if it will not agitate and spin, replace your motor coupler, if it agitates and dont spin, replace your lid switch.

alot of times the washer will drain but we hurriedly cut it off when we hear noise or the water is out but it never spinned and so the clothes are soapy wet...