Galaxt tab3 no start up

To unlock the bootloader on your Lenovo Tab3 7 Essential (TB3-710I) tablet, you need to follow these steps:
Note: Unlocking the bootloader will erase all data on your device. Make sure to backup your important data before proceeding.

1. Enable Developer Options on your device. To do this, go to Settings > About tablet > tap the Build number 7 times.
2. Enable USB Debugging. To do this, go to Settings > Developer options > enable USB debugging.
3. Download and install the ADB and Fastboot tools on your computer.
4. Connect your tablet to your computer using a USB cable.
5. Open a command prompt window on your computer.
6. In the command prompt window, type the following command and press Enter: adb reboot bootloader, This will reboot your tablet into the bootloader mode.
7. Next, type the following command and press Enter: fastboot oem unlock, This will unlock the bootloader on your tablet.
8. Once the process is complete, reboot your tablet by typing the following command and pressing Enter: fastboot reboot. That's it! Your Lenovo Tab3 7 Essential tablet's bootloader is now unlocked.

Isabella,
Bluetooth is bluetooth is bluetooth.

You tab3 lite has bluetooth so just go through the procedure and it will recognize your keyboard.

Semper Fi,
Z

Yes you can, your pacemaker has to have a strong magnetic field to interfere with it.
Here is a list of devices and whether or not they will interfere with your pacemaker from the American Heart Association.

Devices that may Interfere with Pacemakers

Hi, here is some instructions for you on this site:
How Do Uninstall An Application On My Galaxy Tab 3 Wi Fi Tabs Samsung

Hope that helps.

Search BING or GOOGLE by typing: "MANUAL FOR TAB3 T210"

The SSID is the Name given to the Wireless-Connection you want to join. Browse your Router-Configuration for these information.

That is not a lot of information to go on, but I'll give it my best.

Sometimes electronic parts can work one time and not the next when they near the end of their useful life. Also, moisture can get in and cause problems if the protective seal gets broken.

Your best bet is to find a shop that has modern analyzers for your vehicle. Some charge a fee to test and some do not. Ask around to find one that other people have learned to trust.

The Dodge dealer will have the newest, most modern tester available but their prices may be higher. Not always. Get estimates before any work is done and make them stick to the price. Most states allow them to legally add 10% to a bill.

In wish you luck getting this issue solved.

The charger has a function that restores the battery operation parameters by discharging then charging the battery a number of times. Refer to charging instructions in the pack but I think the cycle is a 3 hourly one, time to charge from a full discharge. If the charger thinks the battery is dead then it will try to recover the battery using this process. You may have left the charger on long enough to charge then also discharge the battery.
Start again and charge for the time in the instructions ONLY, if you are not sure of the time try it for an hour, then without disconnecting the charger turn the unit on and take particular note of any screen messages, if any.
You should be able to continue as normal now, but still be aware of the time you are leaving the charger connected for, as it may take some time before it returns to normal operation and stops trying to recover what it thinks is a dead battery.

sEARCH FOR Flash Player Plugin for your tablet and install or update plugin.

Multiple? Sounds liek a dud. return it for a good one.