The camera will not switch on - Kodak EasyShare Z1275 Digital Camera

In menu option C.Fn-12 you can choose to switch the display off (or on) when you switch on the camera. The display stays off even if you switch of and on the camera.
Press the button <DISP> and switch off the camera, while the settings for recording are on the screen. After you switch on the camera, the LCD screen will be switched on again.
Please refer toy your english manual, I had to translate, because I don't have the English version.

Remove the batteries and press power and hold for 30 seconds, replace battery and power on.

If this is a brand new camera, it's supposed to work with no problems. Take it back.

duo to memory full

Your memory card must have had the switch moved from locked to unlocked. To fix this, removed the SD card from your camera. Look on the side and you will find a little switch. One end of the switch says locked the other end says locked. Move the switch from locked to unlocked. Replace it in your camera and turn it back on. Try it and let me know if I can help more.

need to replace the on/off switch for this camera. I have the broken piece that cannot be repaired. How can i find a replacement switch. I can repair the camera myself with the new switch. thanks.

I just gave it a very hard tap against my dinning table and it became alright!

The camera was working fine 5 days ago. Yesterday when I tried to switch it on, I assumed that the battery was flat so I charged it but when fully charged the camera still won't switch on. i Please help!

Make sure that the mode switch on the cover is in the playback position. Unfortunately, I don't have a source for new switches.

It sounds like a bad connection with batteries or battery holder or a loose cable somewhere within the camera. Maybe even a dry solder joint or intermittent fault with the power switch. Unless you know your way around the innards of your camera I'd recommend a qualified tech to take a look. BMW