Problema k300 SE 128MB BIOS P/N 113-A33406-100

Se puede extraer en este enlace http://support.hp.com/us-en/document/bph07107 sobre c?mo solucionar su problema CV placa base.

Si se sigue produciendo el problema, buscar un t?cnico inform?tico para comprobar en su ordenador.

go into bios and load to defualt setting
or
just remove the cmos battery turn it on then turn it off and put battery back in turn computer on then it should reset

Problema ar putea fi cu RAM. ?ncerca?i s? ?nlocui?i RAM primul.

no problem friend please open your cpu shutter and you can see here a cell like watch's cell plug it out and replace it with the new one and start your computer now your this problem is 100% solve. thanks

It sounds like your bios were improperly flashed or went bad. The X300 SE message is your video card. So your video card works, the system mostly works, but the BIOS isn't starting up. You should contact Dell and tell them the situation.

hi try to download this software and hopefully ur problem will be solved http://www.driver-download.net/ati/video-adapters/radeon-9200-se-128mb-ram/

pedes especifacar mejor el problema? se congela la imagen?

bios updete can do pto alimit it cannot convert 1.1 usb to 2 or support more memory . contact any service cenetr to get hel[ful advice and bios update

The message on the user's manual only indicates the possible maximum memory that can be shared with the video while in your bios you can see the actual shared memory. I think this could be case to do with the graphics card you are using i.e. is it onboard or an add on. In some cases too the manufactures of the motherboard are not the same manufactures of bios and therefore the manufacturer of the board has given it allowance to share up to 128mb while the bios manufacturer has given it up to 64mb. Remember many of the components on the board may come from different companies.