Pictures taken will not show up on memory card after the picture has been taken.
SOURCE: Card shows read error in Preview Mode
Let's try a couple of easy things first. Remove the card and clean the contacts with a soft cloth. Next, try connecting the camera to computer, and "right-click" on the camera icon. Go to "properties", "tools" and perform an error check on the card. Open the card and see if there are any files or folders that shouldn't be there. Delete them if there are any. If you absolutely need to recover the images, you may need to try image recovery software. Some are free downloads and vary in effectiveness. If the images are not super valuable, you should be able to format the card in the camera, which will wipe out all data, both good and bad. The card should then be useable, and void of any images. Good luck.
SOURCE: Memory Card problems
Sometimes it's just cause the battery's low... Weird but true. And it might also be beccause it didn't ''clic'' in the slot!
SOURCE: Deleting pictures from memory card
The camera lacks internal RAM or space on the card to do enough caching to delete the pictures. If you were to not exceed about 60% capacity of the card the camera may be able to delete as much as you want on the card. You have to try this. If the camera has a format option for its memory card you can try it out to see if this will clean up the card. The other solution is to have a PC computer. Most of these devices are designed only for PC interface. Jerry G.
59 views
Usually answered in minutes!
×