Error no. C6400

Replace the FUSER

C6000 km-1820.3gp - YouTube

? 0:55
www.youtube.com/watch?v=Ef0WwaTXgtQ
Oct 6, 2010 - Uploaded by natasmanda01 Cancelamento dos codigos de erros c6000, c6400 e c6020 da kyocera ... HOW TO RESET AND HARD RESET KYOCERA HYDRO XTRM ...

Printer Resetter: Solving error C6000 on Kyocera Mita printers

pritner.blogspot.com/2013/08/solving-error-c6000-on-kyocera-mita.html
Aug 8, 2013 - c6000. error. Error Message Check Ink U041 · Xerox WorkCentre C2424 DADF Error ... SSC Service Utility Software to reset Epson printers.

Hi
I found this explanation of your error, although my understanding of it is not entirely clear.
Code: C6400
Description: Zero-cross signal error
Interrupt of the zero-cross signal does not occur more than 1 s.
Causes: Poor contact in the connector terminals.
Defective power source PWB.
Defective engine PWB
You can find this here:
Error Codes Kyocera Mita TASKalfa 221 Code C6400
and also by changing the drop down menus along the top of the page you can view other errors for your machine and for other models and makes. You can also use the link to get a Service Manual for your machine.
Hope this is helpful, if so would you please register that with Fixya
Cheers

model?

Usually these are just software issues which can be solved by uninstalling the old one and reinstalling it. Cleaning the system with a cleaning utility of all old unwanted files, links etc may help solve the issue. Restoring your system to an earlier date when you didnot have any issues will also solve the problem. Especially in Windows Xp.

C6400 is a fixing unit error.

To reset -

Try this, enter "10871087" from keypad, You should now be in maintenance mode.
Enter "163"press "Start / Print" key.

You should see a screen that says "Execute".

Cursor / highlight "Execute".

Press "Start / Print key.

The machine will turn off and should come back to ready. If not then you need to replace the fixing unit.

I hope this is helpful,
Shawn

A Copystar or Kyocera service technician must reset the fuser memory.

Defective power supply board. or Defective engine board

you have a fuser problem, burnt out heater lamp needs to be replaced. call service representative for parts

i have problem in my copy machin kyocera fs-1118  this problem is erreur c6400