SOURCE: low water pressure on whirlpool
Hi from retired Englishman in SW France,
If you have checked that the hot and cold water taps are turned on fully and the hoses are not kinked or squashed at the back, it is worth while checking both the hot and cold water inlet filters. Turn the taps off and remove both hoses at the washer end. Inside each inlet port there is normally a little filter which should just slide out. Clean if necessary and replace each one and the hoses. If after turning the taps back on there is no improvement, the problem is symptomatic of a malfunctioning hot or cold water control valve. Sorry but it needs a service call ;-0(
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck,
John C
46 views
Usually answered in minutes!
Hi Anonymous, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
When you ask about pressure, what are you referring to?. Water inlet pressure?
×