Kyocera printer printing light - Kyocera FS-C5030N Led Printer

Install software driver again..

unplug the network cable turn machine off and then on without the cable plugged in if it comes ready your problem is the print job delete it

hi,

please visit the site
I have printed both from the CLI and the GUI; no difference. I thought maybe the paper ... http://www.openprinting.org/printer/Kyocera/Kyocera-FS-920 .... Also it seems the CD supplied drivers won't solve your problem. .... And NO WD-40 on plastics, better take silicone spray in a very light dose. ...
forums.scotsnewsletter.com > ... > Main > Bruno's All Things Linux - Cache

Are you using an after market toner? Sometimes the non Kyocera toner causes light copies?

The flashing is a code. Depending on if it is flashing fast, slow or so on...
Turn to page 32 of this manual for more information.

If you are satisfied with my answer, be sure to click on the "Thumbs-Up". If you have further questions, please feel free to ask them. Thanks for using our service!

pls refix your printer catridge.

Your more than likely out of ink.

Reinstall the driver again, if it doesnot work, you have to update the firm ware of the machine, you can find this on kyocera website.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Make sure the ready light is on. Press the green go button.

Also make sure you don't have printing paused.

CONTROL PANEL
PRINTERS AND FAXES
DOUBLE CLICK ON YOUR KYOCERA PRINTER DRIVER
CLICK FILE
IF THERE IS A TICK NEXT TO PAUSE PRINTING, THEN CLICK ON PAUSE PRINTING
IF NOT THEN DON'T.

ALSO MAKE SURE YOUR PRINTER IS SET TO DEFAULT PRINTING DEVICE.



If all else fails, install the kyocera fs-1700 driver for the printer. it's a generic driver for kyocera-mita.