SOURCE: Toshbia estudio 600 error code CD20
This is not an easy procedure. Most likely, the auger is stopped up with chunks of hardened toner, which is prohibiting the auger motor from turning, thereby causing your code. You are going to have to take the main board off, as well as the metal tub that the board is mounted in to remove the auger. Once these are off, you will be able to see how it comes off. If you need more info, let me know.
hope this helps,
C
SOURCE: estudio 3511 empty waste toner problem
Hello sir;You have to empty waste toner container, it located at the end of the drum unit.
SOURCE: Canon IR2018 keeps saying waste toner full
...the waste compartment is same unit in the drum unit...if you know how to take out the drum unit then you can see the waste compartment...but be carefull not to damage the drum...couse its will cost you a lot, the price of a drum is high...and if you can change the blade in the drum unit then you can emptying the waste toner...better call for the expert technician...
SOURCE: our imagistics 8130 has the
Hi how are you this is jack ... [email protected]
Dear you wash the waste toner bottle clearly. But error still your copier you check the waste toner bottle dection SENCER OR IS DIRTY CLEAN IT..
PLEASE VOTE ME .
Thanks
Best Regards,
SOURCE: Toshiba 3530c estudio waste toner error message.
Your waste toner box is located inside the front cover on the far left side of the copier. There is a plastic cover that is just clipped in (no screws) and just pops off, the waste toner box just slides out from there.
89 views
Usually answered in minutes!
×