My bowflex treadmill 7series has stopped incling

SOURCE: Err LS on Bowflex Treadmill

The machine needs to be re-callibrated. L5 error.
Your speed sensor must have been damaged either during shipping or use. You'll need a new one. If under warranty - give Bowflex a call. They will ship you out a new sensor and guide you through installing it via the phone... re-calibrating the machine... and getting it operational again. It will take about 2 hours.

The instruction book doesn't mention calibration. be sure to not callibrate in metrics, however (there's no way to easily tell the difference - you have to ask) or you'll be strolling like a walk in the park at 5 "mph".

Thanks for using FixY - a FixYa rating is appreciated!!

ernesto cuadra

• 12223 Answers
• Posted on Dec 19, 2011

SOURCE: who can repair my bowflex treadmill 5 series in toronto

There are four typical causes for this problem :

1) The walking belt and/or deck are worn. (85% of the time)
2) The walking belt and/or motor belt are too tight- if you have adjusted either recently. (8% of the time)
3) The motor has lost torque and needs brushes or has demagnetized. (5% of the time)
4) The controller board is dropping output. (2% of the time) . You can do it foryourlsef. However i will give some websites FOR TO CONTACT THEM:

www.unitedassemblers.com + www.treadmildoctor.com

Sincerely. Merry Christmas.

ERNESTO CUADRA
MANAGUA, NICARAGUA.