How to factory reset a bizhub 350 - Konica Minolta bizhub 350 All-In-One Laser Printer

Why the reset of the machine code issue? Why the reset of the machine code issue?

YOUR SURE???

The following settings are cleared.
• Fax-related setting information
• Bulletin board setting information
• Transmission/reception log information
• Image data
• Network setting information
• Destination information
• Soft switch information
• Management-by-account setting information
• User authentication setting information
• Account/user counter
• Remote maintenance setting information
• FW download setting information
• Copy setting information (zoom ratio, paper size, erase width, paper source detailed
information, copy job program, bypass free size registration, etc.)
• CSRC setting information Setting/


Try this procedure assuming default PW has not been changed.
1.On the right side of the machine just below the scanner section (The part with the big glass) is a cover next to where you connect the Ethernet cable. Remove the cover, with the machine on use a small screw driver and gently depress the small black switch. The machine is going to go thru some screens watch the left side of screen in the middle you will see a "." when that is displayed press 3. Enter the 8-digit service code and touch [END]. (Default value: 00000000) TOTAL CLEAR SEE ABOVE ALL THAT WILL DO!!!!!!!.

2. Touch [Total Clear] from the Initial mode screen.
3. Select [Yes] and touch [Enter] to start the clearing sequence.
4. When the message indicating completion of the clearing sequence appears, touch
[OK]. YOUR SURE??? The following settings are cleared. • Fax-related setting information • Bulletin board setting information • Transmission/reception log information • Image data • Network setting information • Destination information • Soft switch information • Management-by-account setting information • User authentication setting information • Account/user counter • Remote maintenance setting information • FW download setting information • Copy setting information (zoom ratio, paper size, erase width, paper source detailed information, copy job program, bypass free size registration, etc.) • CSRC setting information Setting/ Try this procedure assuming default PW has not been changed. 1.On the right side of the machine just below the scanner section (The part with the big glass) is a cover next to where you connect the Ethernet cable. Remove the cover, with the machine on use a small screw driver and gently depress the small black switch. The machine is going to go thru some screens watch the left side of screen in the middle you will see a "." when that is displayed press 3. Enter the 8-digit service code and touch [END]. (Default value: 00000000) TOTAL CLEAR SEE ABOVE ALL THAT WILL DO!!!!!!!. 2. Touch [Total Clear] from the Initial mode screen. 3. Select [Yes] and touch [Enter] to start the clearing sequence. 4. When the message indicating completion of the clearing sequence appears, touch [OK].