I have a intex pure spa and the bubble work for about 30 seconds. I get an error code E90. I cleaned the filters and cleaned the in/out valves but it still gives me the error code. What should I do?

Jerome Minks

• 3103 Answers
• Posted on Mar 06, 2014

SOURCE: I need filter cartridges for Intex Spa

sometimes these can be hosed off with a garden hose and reused a couple of times..

Jerry Kramer

• 3933 Answers
• Posted on Apr 13, 2014

SOURCE: intex spa

You have a bad GFI plug. Replace it and you should be fine.

SOURCE: We have a LED code showing on the new Intex pure spa. E97 Dry-fire Protection. What does it mean

Dry fire protection is when the heater has a call to heat but it is sensing NO water flow, therefore heater will be disabled.

A dry fire is when the heater comes on with NO water flow - damaging your heater beyond repair.

Causes: No water in tub, closed valves, clog restricting water flow, or the pressure/flow switch had failed?

johnny rebel

• 10875 Answers
• Posted on May 22, 2015

SOURCE: I tried intex corp to get an o ring for pure spa, but they are out of stock. Wondering if anyone knew of retailer of intex who sold parts

funny,they have them now,

Spa Control Station Air Inlet Ring Replacement Parts Spas Store Intex

SOURCE: I've got an Intex pure spa hot tub and the air bubbles button isn't working but the LED screen is on??? Any suggestions?

• Do the other buttons work fine?
• Did you press REALLY hard and break it
• Have you tried pressing it REALLY hard when its not broken- Probably a bad idea
• if you have the know how and the bravery take the face plate off (MAKE SURE THE POWER IS OFF AND THE WHOLE THING IS UNPLUGGED)!!!!!1
• check the wires going to the back panel of the screen Rusted, corroded? Might be covered under warranty - refer to manual or look-up based on how long you've had unit