Question about Whirlpool Ultimate Care II LSQ9564J Top Load Washer

Open Question

Smells when top open

Smells when lid open and not in use

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washer smells moldy. Could it be filter don't know where it is located . It is admiral top load 2 speed heavy duty.


debra, I would run a hot water cycle without cloths, add clorex -clorine and a little detergent to the water. After the cycle fully runs, leave the lid open for few hours. It might help. Good Luck.

Dec 29, 2014 | Washing Machines

1 Answer

How do i stop my washer from smelling


try adding fabric softener or pour a cup of ammonia in it when the wash is completed .

Jul 02, 2014 | Estate TAWS800JQ Top Load Washer

1 Answer

Kenmore 2600 TOP LOADER smells like Mildew. I can hear water sloshing around under drum. Is that Normal?


The drain on all washers have this issue. Unless the drain hose runs down hill, when the pump stops, water runs back into the machine that was in the hose but was not drained.

Feb 17, 2014 | Kenmore Washing Machines

1 Answer

Whirlpool calypso washer smells how to get rid of ordor


Removes odor causing residue in front loading (HE) washers. Keeps your machine fresh and clean. Package includes 3 tablets. For front load washers only.

Here is what you need.

Oct 18, 2012 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

How do you fix lid switch on frigidaire top washer?


I would get the local washing machine guy to check that for you as dealing with live 230volt AC can be lethal to you eric

Dec 29, 2017 | Frigidaire Washing Machines

1 Answer

Washer smells like mildew


This sounds like the pump is clogged up or the drain hose from the pump is retaining debris. The pump is easy to remove and check. There is a video at www.appliancehelponline.com/servicemanual.html check the video on how to take apart a direct drive washer. This will walk you thru the disassembly and the pump removal.

Apr 09, 2010 | Roper RAS8445KQ Top Load Washer

1 Answer

Kenmore 90 Series Washer


CHANGE THE LID SWITCH

Apr 18, 2009 | Washing Machines

1 Answer

Zanussi aquacycle 1200 smells coming from between the drum and casing.Suspect it is caused by a build up of slime etc.


1. Set the washing machine on the highest water level, temperature on hot and the wash cycle to normal.
2. Fill a gallon jug with hot tap water. Once the cycle begins, let it run for a minute or two, then stop the cycle, open the lid and slowly add the gallon of hot tap water. Don't overfill — you just want to raise the water level so that it is able to reach and clean the inside top rim.
3. Add 2 to 4 cups of household chlorine bleach and restart the cycle. In a couple of minutes, stop it again and just let it sit for at least 30 minutes. Afterward, let the cycle finish, and open the lid to air out the inside.

I got it from this link: http://answers.yahoo.com/question/index?qid=20060827101905AANuYg4
and here:
http://deseretnews.com/dn/view/0,1249,600124768,00.html

Jul 02, 2008 | Zanussi FJS1225W Front Load Washer

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...