Where is the fuse for JVC LT-47 EM59 - JVC LT-47em59 47 in. TV

The TCON board or the LCD panel is faulty.Can confirm by replacing the TCON board.
If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Sounds like some kind of data interference or glitch. Dry caps will cause interference. By not smoothing inputting signals.

In order to reset a TV, just unplug. There is no menu reset option

Make sure tv is receiving power, then check the power board.

Hey damfinebroin,

Check out this link for the Manual of JVC LT Televisons

Good Luck

same thing happened to my laptop ended up buying a new screen on ebay but im not to sure with a tv

It can be two possible problems: the power supply is not putting out 24vdc for the backlight inverter boards due to leaking/bulging top caps, or the inverter board is bad.
Parts: http://www.shopjimmy.com/catalogsearch/result/?q=JVC+LT-47P789+

http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Power supply board is dead.U have a LED light indicator on LCD panel flashing?The tv is completely dead,no LED light at all?Tries Website like Shopjimmy.com.Ebay.com to buy a refurbish power supply for the replacement.

Usually the IR receiver is located on the same board as the controls on the front of the TV or the same as the LED lights. If you suspect the IR sensor as being bad here are the part number for the control and LED pcbs. Please take a moment to rate my answer. Thanks..

CONTROL PCB: SFL-7224A-M2

LED PCB: SFL-8733A-M2

How many video ports does it have? You may have to search through video 1, 2, 3, or switch the TV itself to component/HDMI depending, with the remote. Should be with an 'input' button.

My tv has a list with HDMI, SVIDEO, COMPONENT, PC, ect. and its a 1080p one, im just assuming all HDTV's have a list