Sharp tv aquios - RCA Universal Remote Control

please remove. Not a question!

power board voltages incorrect. weak capacitors or a warn voltage regulator.can also be a symptom of a faulty bridge rectifier,

Your owners manual will tell you. Barring that, google the make and model#. Different models, different features. good luck.

Hi Richard,
Please consult some local TV tech or the service center. There is nothing you can do about it yourself.

Use an RCA cable from the TV's audio out to the AUX in the home theater unit.

Factory Default Reset:

- Unplug the TV and count to 10 slowly.
- Hold down the power button on the TV (not the remote.)
- Plug in the TV while holding power button.
- Count to 10 and release the power button.
- Turn it on and hope for the best.

Go to Sharp's web site and you will find info on updates, simple process to locate the dowload, then install on a flashdrive and install into the TV.
Good Luck !

Make sure you tv is not in SAP mode. this will cause this issue.

unplug the tv from the power outlet, wait until the light stops flashing then plug it back in. works for me.

the flashing light means that your tv needs to be serviced, if its still under warranty you shouldnt have to pay for this.

-w