Whre is the serial no for hotpoint washerdryer location

press the helpful button ,links below for your Bosch WET 2820

Download instruction manuals

http://laundry.manualsonline.com/support/other/washerdryer/wet-2820-washerdryer-manual-5233637

User manuals Service Bosch Professional

http://www.scribd.com/doc/286185567/bosch-wet-2820-manual-download-fast#scribd

It is usually on the serial number sticker, which can be hard to find or have been removed/fallen off. If you can find the serial number, your vendor or the Invacare Co. can tell you the model, etc.

hi the fuses are located under the drivers side (jdm version) on the side of panel under a black plastic cover, just look for the blown one as the locations are all written in japenese

Please check on the link for details on how to identify the parts of the machine

http://www.espares.co.uk/advice/washing-machines/a/7/311/how-to-identify-washerdryer-parts.html

Also there are many visuals for the Hotpoint washing machines in this link. please check these out .

Hi from retired Englishman in SW France,

Is there no information in the operation manual?
In case you do not have a manual you will need to type into your search engine/web browser '(make) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount. During the process you will be asked for the actual model number!

Good luck,
John C.

Please check if these links help;

www.laundry.manualsonline.com/ex/mfg/headline/m/???whirlpool/d/???washerdryer/type/???manual_???request



www.manualsonline.com/ex/mfg/headline/m/???whirlpool/d/???washerdryer/type/???manual_???request

In the last few years GE has placed the models serial label on the top center, top left or top right of the fresh food section. Older models had it behind the fresh food door at the bottom or behind the grille. Also there were a couple of years they placed it behind or to the side of one of the lower drawers.

Sorry about all the different locations. That's just how they did it.

Thanks.

The interlock is stuck, you need to get behind the casing to release. this can be done by taking the top off and reaching down to the door mecanism and pushing the lever open. CAUTION disconnect the machine from the electricity supply before attempting this.

replace the water valve . check you have good water pressure on the inlet.