What is the cubic feet of washer model 11092573210

The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius ...

4 cubic feet

used set maytag -washer pav2300aww and dryer lde4916ade

https://maxappliances.ca > Shop
SET by MAYTAG WASHER MODEL: PAV2300AWW DRYER MODEL: LDE4916ADE The washer has a capacity of 3.6 cu ft. The Dryer has a capacity of about 4.0 cu. ft.

Good Afternoon Friend,

I understand you want to know the capacity of your Frigidaire washer, model# FWT445GES2. After researching your model, I found that the capacity of your washer is 4.5 cubic feet. Hope this is helpful.

-Best Regards-
WP

If my calculations are right, this washing machine is approximately 3.00 cubic feet. You may want to double check it for yourself, though. I used http://www.ehow.com/how_6358141_calculate-cubic-feet-washer.html (updated 5/7/2010) to help in the calculation. My machine was approx 15"/1.25' deep and 21"/1.75' high. Hope this helps.

We have the same model. We plan to purchase a replacement washer, and tank size is a major factor.

Machine manuals are available at www.whirlpool.com. It's great Whirlpool has the docs available online, but there was no indication of tank volume for this model found in the manuals: Parts, User, Instructions.

I decided to figure it out by filling the washing machine tank manually counting the number gallons of water dumped in. I managed to dump in 23 gallons before risking overflow. I don't recommend this approach since the specified water level limit for the tank assembly may be lower than the perceived water level limit. This volume test was performed on a machine that's being disposed.


Google says 1 US gallon is equivalent to approximately 0.1337 cubic feet. Applying this ratio to the number of gallons poured in, the volume is 3.08 cubic feet. If 24 gallons, then 3.21 cubic feet.

I'm sure the tank is not 4.0 cubic feet since that would have required another 7 gallons of water, beyond the 23 already poured in, making a mess on the floor, and potentially wetting machine wiring and other hardware that should remain dry. Even if we account for the space occupied by the agitator, it's unlikely an additional 7 gallons of water could be added without significant overflow.

4.0 cubic feet is approximately 30 gallons.

We're going on the assumption our LXR9245EQ2 washer is a 3.2 CF machine.

The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches.

4.3 cubic feet
with a loadable space of 3.9 cubic feet
you must leave a gap at the top so the cloths have sopmewhere to move as they tumble

The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches

3.2 cu ft.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.