How to add a pass key on my phone of a Jabra Bluetooth

check bluetooth is on in Iphone settings ?

forget the headset
turn bluetooth off
turn the headset device off
reboot phone.
try again

Most Bluetooth headsets require a passcode to sync with the phone and to make sure that is the device you want to sync with. Each of these manufactueres usually have a default passcode to use. It is usually in the manual.
For your Jabra BT2080 Bluetooth model the default code is: 0000 (4-zeroes)
Here is the link to your manual: http://www.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT2070/BT2080_UM_6909.pdf

Hold the "Answer/End" button on your Jabra Bluetooth headset down until the LED light on the headset turns solid blue. The location of the button may vary based on which headset you have, but its appearance will be the same; it is the button that has an image of a telephone on it.


Click on the "Settings" icon from the main screen of your iPhone 4 .

Click on "General" in your iPhone's "Settings" menu.


Click on "Bluetooth" to access your iPhone's Bluetooth menu and then click the option to turn on your iPhone's Bluetooth connection. Once your iPhone's Bluetooth is turned on, it will search for available Bluetooth devices.


Select your Jabra headset by clicking on the icon that appears on your iPhone's screen.


Enter the passkey for your Jabra Bluetooth headset. The default passkey on Jabra headsets is "0000."


Click on "OK" on your iPhone 4 to complete the connection to your Jabra headset.

Tips & Warnings



The LED light on your headset must be solid blue to pair to your iPhone. A flashing light indicates your headset is not yet in pairing mode and your iPhone will not be able to connect to the headset.

Having your iPhone 4 Bluetooth turned on will drain your phone battery faster than normal.

The default passkey is 0000

how do i sync my jabra(bt3010) to my lgtouch cell phone

My Jabra Halo works to play iPhone's iPod music as well as phone calls. So does Jabra Arrow, I'm told. The bluetooth must have A2DP.

Turn ON the bluetooth headset (keep the button pressed for few seconds) and bluetooth connection of your Nokia phone. Search for the device from your phone, when found enter the pass key "0000" (its default) when prompted, set this device as authorized to pair it.

Hi terry, first thing to do is,

• make sure the headset is off.
• press and hold the answer/end button until a solid blue light comes on.
• go to your phones settings turn on the bluetooth.
• select the option on your phone to discover or add a bluetooth device.
• your phone should discover the jabra bt350.
• your phone will then ask you if you want to pair with this device.
• accept by pressing ok or yes.
• confirm with the pass key or pin = 0000

I took my husband's suggestion and used 0000 and it worked. My husband claims it is the factory default for all bluetooth headsets. Try it and let us know if it works.