Question about Frigidaire GLTF2940ES Front Load Washer

1 Answer

What does error code 18h mean - Frigidaire GLTF2940ES Front Load Washer

Posted by Anonymous on

Ad

1 Answer

  • Official Brand Answer
  • 2,267 Answers

Hey friend, thank you for the post!

I see you are getting an 18h code on your front load washer. Normally any error code would have the letter E or F in it. I would suggest that stands for 18 hour delay start cycle, you could do a reset on your washer by disconnecting power to it or turning off the household circuit breaker for ten minutes and turning it back on. Hope this information is helpful. -Matt

Posted on Jul 25, 2014

  • 1 more comment 
  • Zimmerman Dec 20, 2014

    18h Matt you don't know what this means... Turning off the power is not going to change anything.. 18h is a design of the manufacturers error.. Replace the control main board seem to fix it for me.

  • scott H
    scott H Aug 22, 2018

    A brought in a repairman and he couldn't solve the problem. Didn't know what the 18H error code meant. Paid him the service fee and he suggested I buy a new washer. Woke up this morning and the washer was fine. a little over 18 hours maybe 48 but working. Matt might be on to something.

  • scott H
    scott H Aug 22, 2018

    . I also re-booted the circuit breaker twice when he was here. My suggestion wait it out when you the 18h message before you run down to the appliance store. if necessary a load of wash is only about $3.00 at your friendly local laundromat..

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is18h code on gltf2940es0?


Thank you for your post, Jeff Duvall!

I see that your Frigidaire washer is displaying an error code of "18h". However, it appears "18h" is an invalid error code. In order to clear any false error codes, let's attempt resetting your range. You can do this by unplugging it or flipping the household circuit breaker to the off position for approximately ten minutes.

If resetting the power does not correct the issue, could you please inform me of the new error code or if your washer continues to display "18h". I look forward to assisting you. -Matt

Nov 09, 2014 | Frigidaire Washing Machines

1 Answer

My machine gives me error code 18h wont do anything


Are you sure it is an 18h? There is no such error code for this manufacturer anywhere. What cycle was it in and what was it doing/not doing when this happened?

Sep 04, 2012 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

My didgital frame will not turn on. ADS-18H-4 0918G


My didgital fram will not turn on. ADS-18H-4 0918G switching adapter does have a slowly pulsing green light. But will not turn on the picture frame. Where can I get a replacement or how do i get it to work

Mar 22, 2010 | SmartParts SP15MW (092566981886) Digital...

1 Answer

Where to buy a ads-18h-12-4 1218g power supply


Ebay seems as good as any ....

http://cgi.ebay.com/ADS-18H-12-AC-Adapter-9v-2A_W0QQitemZ250532141467QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3a54e1199b

Satisfy yourself its the right thing before purchasing (The SKU matches, but that doesn't necessarily mean.....)

Hope this helps

Mar 06, 2010 | SmartParts SP15MW (092566981886) Digital...

1 Answer

Konica minolta 2490mf


18H: Heating roller warm-up failure

1 Check the fusing unit for correct installation (whether it is secured in position).
2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary.
3 Check the lever of the safety switch and correct as necessary.
4 Change the fusing unit.
5 Change PRCB.
6 Change DCPU1.

Jun 22, 2009 | Konica Minolta magicolor 2490MF Laser...

1 Answer

1996 Ford Crown Victoria Shifting


when was the last time you had the fluid and filter changed? This trans should be done every 30,000. Is it shuddering as the torque converter locks up?

TSB 97-10-6 has a repair procedure for this ysmptom:

Vehicles equipped with an AODE or 4R70W transmission may experience a torque converter clutch shudder or vibration. This occurs under light to moderate acceleration above 56 km/h (35 mph) while in 3rd or 4th gear. This may be due to either transmission fluid breakdown and/or the Powertrain Control Module (PCM) calibration.

Verify that bulk fluid does not have moisture contamination. If suspected, use quart containers of MERCON®. Refill transmission with the proper amount of Motorcraft MERCON® Multi-Purpose Automatic Transmission Fluid (ATF) (XT-2-QDX).

NOTE: DO NOT USE MERCON® V.

Check emissions decal to verify vehicle has the latest calibration. If it does not, reprogram the PCM to new calibration level using Service Bay Diagnostic System (SBDS) or New Generation Star (NGS) Tester with May 1997 CD-ROM or later. Refer to the PCM Calibration Chart found at the end of this article for proper application.
NOTE: VEHICLES SHOULD BE DRIVEN A MINIMUM OF 480 km (300 MILES) TO WORK THE NEW FLUID INTO FRICTION MATERIAL.

------------------------------------------------------------------------------

PCM CALIBRATION CHART Application Old Calibration Old Part Number (-12A650-) New Calibration New Part Number (-12A650-) 1996 Crown Victoria/Grand Marquis 49S/Canada/High Altitude 6-18F-R05/R11 F6AF-AE 6-18F-R11 F6PZ-DJA 49S/Canada/High Altitude 6-18H-R05/R11 F6AF-BE 6-18H-R11 F6PZ-DKA Mexico 6-18H-R05/R11 F6AF-KE 6-18H-R11 F6PZ-DMA Police 6-18I-R05/R12 F6AF-CF 6-18I-R12 F6PZ-DLA California 6-18M-R05/R11 F6AF-DE 6-18M-R11 F6PZ-DNA California 6-18N-R05/R11 F6AF-EE 6-18N-R11 F6PZ-DPA

Mar 02, 2009 | 1996 Ford Crown Victoria

2 Answers

ERROR CODE 18H


18h is not an error code error codes will be displayed be an E followed by numbers this sounds like delayed start try hitting cancel then if that don't clear it try unplugging the unit for 5-8 seconds let me know if that don't clear it and we will run diagnostics on it

May 22, 2008 | Frigidaire ATF6000ES Front Load Washer

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

934 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

J. Bradshaw

Level 2 Expert

121 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...