Hunter Fan Company 5/1/1 Programmable Thermostat Logo

Related Topics:

A
Anonymous Posted on Jul 29, 2014

Hunter 44860 touch screen thermostat reads service heat pump system

5 Related Answers

Anonymous

  • 52 Answers
  • Posted on Jan 29, 2008

SOURCE: Hunter 44630 thermostat

Here is a link that will have wiring diagram it is for a similar model hunter. Also check your dip switch on the back of the stat to ensure it is set for gas (HG) or electric heat (HE) depending on your type of unit. Good Luck. Rule of thumb for most four wire systems is RED (power to stat) Yellow (Cooling) Green (Fan) White (heat)

Ad

Anonymous

  • 1 Answer
  • Posted on Oct 22, 2008

SOURCE: hunter thermostat 44860

Hit just to the left of the temperature and you will see a fan symbol pop up. Make sure the fan is set to the correct setting. Refresh means the fan will come on every 15 minutes or so no matter what the tempurature. Auto is usually the normal setting I think. Program mode - depends if you have programs. On mode means the fan is always on.

Anonymous

  • 1 Answer
  • Posted on Nov 15, 2008

SOURCE: THERMOSTAT INSTALLATION

I am trying change from a Honeywell ct701A1001 to Hunter 44110 the old one has 7 wire and new one 5wires

Anonymous

  • 2 Answers
  • Posted on Jan 05, 2009

SOURCE: heat won't come on, but

Look at your igniter on the furnace.

Anonymous

  • 2 Answers
  • Posted on Jan 09, 2009

SOURCE: Instruction Manual for Model 44860 Hunter Thermostat

http://www.hunterfan.com/uploadedFiles/Support/Owner_Manuals/44002.pdf

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Help! I can't change the temperature and the system won't turn on. All solutions are appreciated. Please include details.

The first thing to determine is if in fact the problem is in the thermostat or if the problem is in the furnace. The furnace typically provides the power source for the HVAC control system and if nothing is wanting to come on, the power to the furnace could be interrupted. Verify that condition first.

Remember most programmable thermostats have a built-in time delay possibly as much as 5 minutes and that is a long time to wait without pressing or touching another thermostat function.
0helpful
1answer

How do I set my hunter thermostat so when the heat pump comes on, how to set so the thermostat and heat strips from the heat pump sinc with each other. The model number is 44860

call a service tech, this sounds complicated. To avoid using too much energy or burning down your life savings in heating bills, a certain sequence should be followed when the thermostat operates. The actual sequence will differ depending on what equipment you have available to control, as well as your location and heating and cooling loads. The money you could save by having it done right the first time will quickly pay for a service call, then keep on saving you money after that.
25457614-epwetmasq2n0wnrof1fw5po3-5-0.jpg
0helpful
1answer
0helpful
1answer

Auto recovery mode raises the temperature above

Hummm... how far is your Thermostat from your heater? I am reading your extensive manual but there is no mention of that distance? There was a early mention of batteries? Are yours fresh?

Is this a 'new' problem? Has it worked properly before?

Then there is this from the manual:

The installer can set SYSTEM functions once the thermostat is installed. The
default settings are shown in bold in the following list. Options are listed inside the
parentheses. Example: the default SYSTEM TYPE is CONVENTIONAL with (HEAT PUMP) as a second option. See pages 28-29 to change these settings.

Have you tried resetting your Thermostat?? Sometimes these basic 'onboard' computers get confused... especially true with lots of 'options'...

It's a little hassle to get a DIGITAL copy of your manual (I am not a Robot ~ etc) ~ but here it is:

Download manual

TROUBLESHOOTING begins at Page 68

Anthony
0helpful
3answers

Hunter 44860 touch screen temperature override

"Hunter" says it all. Throw it out and buy a honeywell, robertshaw, or a white-rodgers. Hunter stats are notorious in the business as being problematic.
0helpful
1answer

Hunter thermastat, model 44860 not working

Is the compressor running? is the outside unit clean and free from debris? does this unit work in the heating mode during the winter, and is it still capable of that now.
13helpful
4answers

44860 thermostat won't activate in heat mode

I had the same set and problem. I had a RC wire which is the power to the AC. But didn't have an RH wire which is the power for the heat. To fix this just use the jumper wire and insert it in with the RC wire and hook it up to the RH. Fixed my problem.
Not finding what you are looking for?

355 views

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Bade

Level 3 Expert

1818 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...