I received an i-pad from someone how do I put in my i-tun information

Reset your password. If you make a new account and password you will loose all of your old information, apps and app store purchases.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/thomas_e8f475a8655f7b4a

Try this:
I refused to do that hard reset trash and erase all of my information. This method is also just in case you don't have anyone to call you or you're too impatient to wait:
This is inspired by the many posts that tell you to frequently press home while someone's calling.

1. I hit the emergency call button then repeatedly hit home (pic of the house) while opening and closing the phone and went to the home page. It worked repeatedly.
2. Then I went in and took off the pattern request in settings.
3. In settings, make sure Google sync is checked.
4. I changed my password on the computer in Google (with same account).
5. Wait some time 5-10 minutes or less (make sure you have internet service where you're located on your phone).
6. Then it will tell you to enter your password. Enter your new password.
7. Close your phone or hit the red power key.
8. The same locked screen will prompt you for your username and password again. Enter the new password and it will log you in.
9. It will tell you to put in your old pattern or put in a new pattern (I forgot? sorry).
10. Then, you can go into settings and security once you unlock and remove the pattern. You have to enter the old pattern to remove the security.

Try this too:

******This will work and you wont lose any data!!****** Get someone to call you. After answering, flip the screen open and shut repeatedly, tapping the "home" button every few flips. Eventually you'll drop through to your home screen. This may take a few tries.
Go into your security settings and disable the unlock pattern. You can now bypass the lockout just by opening the keyboard. Change the password on your account, which may be your Google Apps account if you have one. In a few moments, your phone will fail to sync with email and prompt you for a password. Enter the new password. You can now log in with the new password. Lock your screen, press menu to try unlocking it, and enter your new information. This should unlock your phone.

src: http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=02b67be6b56ae6e3&hl=en

try to reset your password.

if someone stole your laptop from you , would you want us to teach that person how to get past your password too ?

the owner of the laptop knows the password . that's what admin means

The last time I use myspace.com was more then a year ago so becouse you ask for this information I log in and I forget my password so I was ask to put my e-mail wish I did and I receive my password in my mail and I was able to log in.

Be sure to wait 24 hrs before try it again is my recomendation.
Two you will receive your password in your e-mail

Hope this information helps you
Your vote and rating is very important to me
thank you

Hello,

On the Thinkpad's, it's a fairly easy process to reset the passwords. Try the following steps and you should be able to access the computer...

1. Power off the lpatop.
2. Flip the laptop over and open the Memory cover. It should have the diagram of a Dimm on it.
3. Short-circuit the two password pads or put a jumper on the contacts to short the circuit.
4. Remove the jumper, or whatever you used to short the password pads and put the cover back on the bottom of the laptop.
5. Power on the laptop and you should be fine.

Kerry L

remove the 2 bolts holding the caliper on.then remove caliper.remove pads.you may have to save clips on old pads.now dont let the caliper hang it may hurt the brake line tie it up.once pads are removed open the brake resivoir (where you put the brake fluid).now use a c-clamp to push in the caliper piston(the round part sticking out).once piston is all the way in put new pads on the caliper.don't force pads over roter.line up caliper with the bracket.put bots though the holes and tighten.do both sides and fill up the fluid put cap on.done.no bleeding required.

https://plweb.evenflo.com/faq_detail.aspx?faqid=3934

Question: How do I put the seat pad on the Exersaucer? Answer: 1.Line up the red diamond on the seat pad warning label with the triangle on the back of the seat ring. 2.Fit the elastic loops through the quarter inch gap between the seat ring and rotating rings and hook the elastic loops over the prongs on the bottom of the rotating ring. 3.The plastic tabs on the seat pad are only for reinforcement and don't hook to anything, but should be threaded between the 2 plastic rings. If you still need further assistance please refer to the instruction sheet or call the Evenflo ParentLink Consumer Resource Center at (800) 233-5921 or (937)773-3971 for further information.

- you can try removing the cmos battery - download the motherboard manual from the manufacturer? to find the jumper layout - possibly the jumper is just 2 solder pads and not the actual jumper pins. you can short them momentarily together to get the same result as removing a jumper. - sometimes the inside of the pc case or cover has a schematic sticker attached to give the motherboard layout.