How install a new transfer roller in a km 2550

Clean the feed rollers. Don't use refilled toner cartridges. Brand new OEM toner every time.

KM-2050 dirty on back of copies

Copytechnet https://www.copytechnet.com > kyocera-mita-copystar
Mar 27, 2009 - toner scatter on back of copies. I've noticed a bit of toner build up just below the drum and also a slight bit on the transfer roller. I wiped ...

KM 2050 Copying half of the page!!!!! - Copytechnet
Sep 9, 2014
KM-1650 & KM-2050 - image compression - Copytechnet
Dec 14, 2011
kyocera mita km2050 dirty toner at the back of paper
Sep 25, 2020
Miscellaneous KM-5050 faint copies. - Copytechnet
Jun 3, 2015
More results from www.copytechnet.com
,,

Second image transfer roller a sponge looking roller near the transfer belt. replace it or have a tech look at it

Open the browser on your computer, type the Ip address of the scanner on the address bar, the page of the scanner will open, under scan to email destination, you can add or remove accounts.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Kyocera and Copystar models are the same just replace KM with CS.

The following instructions should help you. TO download the current driver use this link to th emanufacture website; http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?rid=18657.

Kyocera Printer Drivers and Mac OS® X 10.5 Leopard FAQ:
Is the installation for Mac OS X 10.5 the same as for Mac OS X 10.4 and earlier? Mac OS X 10.5 introduced a new printing architecture that requires changes to the installer and installation process. For this reason, Mac OS X 10.5 requires a new printer driver installer.

I cannot see my Kyocera AppleTalk® printer. How can I make it visible to OS X 10.5? AppleTalk is disabled by default in Mac OS X 10.5. Enable AppleTalk to discover your Kyocera printer.If you use the Kyocera installer, a message will appear, asking you to enable AppleTalk. Click Yes to continue the installation.

I cannot find Printer Setup Utility on Mac OS X 10.5. Is it still supported? Apple has removed Printer Setup Utility from Mac OS X 10.5. To install a printer, open System Preferences and click Print & Fax.

When I manually install a printer, multiple PPD files are listed for the same Kyocera model. Which should I choose? When manually installing a printer or changing a PPD for a installed printer, both Linux and Mac OS X PPDs are listed for some older Kyocera models due to a change in PPD handling in Mac OS X 10.5. Linux PPDs can be identified by the word Gutenprint in the PPD filenames.

Supported Multifunction Printers: KM-1650, KM-1815, KM-1820, KM-2050 ,KM-2530 ,KM-2550, KM-3035, KM-3050, KM-3530, KM-4030, KM-4035, KM-4050, KM-4530, KM-5035, KM-5050, KM-5530, KM-6030, KM-6330, KM-7530, KM-8030, KM-C830, KM-C830D, KM-C850, KM-C850D, KM-C2520, KMC2525E, KM-C2630, KM-C3225, KM-C3225E, KM-C3232, KM-C3232E, KM-C4008, KM-C4035E, CS-1650, CS-1815, CS-1820, CS-2050,CS-C2525E, CS-2550, CS-6030, or newer. Supported Printers: FS-820, FS-920, FS-1018MFP, FS-1020D, FS-1030, FS-1100, FS-1118MFP, FS-1300D, FS-1800, FS-1800+, FS-1900, FS-1920, FS-3800, FS-3820N, FS-3830N, FS-6020, FS-6026, FS-9100DN, FS-9120DN, FS-9500DN, FS-9520DN, FS-C5016N, FS-C5020N, FS-C5030N, FS-C8008N, FS-C8026N, FS-C8100DN, or newer.

I hope this is helpful,
Shawn

Call GFBM 1-800-761-MAP

u can come to know from the server
where its physically installed
goto printers and faxes
then oen printer properties
and there is a tab named shared
see the name there
and write it
and then
u can add to the other macine
and can install

for KM2550: go to printer properties; Click on device settings tab; under "installable option" choose duplex unit to installed

cool... ok here is what you do goto usa.kyoceramita.com then downloads... then where it says choose product... choose legacy copier then choose product then... where it says select subcategories... select manuals you need the scan system f operations guides both the setup and functions editions...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

hi 
the drum unit on this model has two plugs which need to be plugged in and one on the dev unit that can come loose.
also the metal mechanism under the dev unit has to be pushed in to enable toner to get onto the drum.
is the transfer roller fitted correctly?

do you have the CD or the driver for the scanner? if so, use the CD to install it. if not, go to the follwoing link and download the driver
http://usa.kyoceramita.com/americas/jsp/Kyocera/download_center.jsp?pid=18154&pcat=10569&rcid=10009&rscid=10007&x=44&y=13
I assume the other 5 computers are not running Wndows XP or don't have the same operating system??

post back if you still having problem.

please don't rate the answer till we finish the Q&A.

Thanks