Question about Home Security

1 Answer

How do I reset my DVR? It is a Sentient (KGuard EL821) 8 ch DVR and it keeps rebooting once a minute. The mouse and remote do not function and I cannot get to the menu.

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Home Security Expert
  • 87 Answers

By Default Kguard EL821 Password is 123456

but if you forget:- To obtain the factory default password, contact your retailer or directly send an email to KGUARD at support@kguardsecurity.com. CCTV Networking Technical Support https://fast.ulmart.ru/manuals/674188.pdf

Posted on Sep 27, 2017

Ad

3 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
EngineerMC

Martin Clarke

  • 186 Answers

SOURCE: Sentient 250GB DVR-RW CCTV N63HH - recording for longer peroids

Just reduce the frame rate slightly on each camera or the record quality and it will increase the data retention period.

Posted on Oct 17, 2010

Adrian Black

  • 37 Answers

SOURCE: how to reset my dvr provision isr 16 ch

open it up and see if there iis a little battery if not try a hard reset

Posted on Jul 23, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'Sentient' CCTV by Maplin help: "Input Signal Out of Range" error message....


What did you change it to? You can try another monitor that will display that resolution, that is your only option unless you can connect remotely to that system and access the settings.

Apr 16, 2018 | The Computers & Internet

1 Answer

How to reset password for a samsung SDE-3004N DVR home security system. There is no remote for the system and have lost the password.


Samsung Security DVR Default Password

For nearly all Samsung Security DVRs, the default password is 4321. If it hasn't been changed since setup, then you can just use that to access the DVR. The default password is included in the reset procedures for completeness. If you have changed your password or access code for your Samsung Security DVR since it was setup, or if you changed it during the initial setup, use that password in place of the default password. The password will be the latest password that was set on the DVR. If no password has ever been set, then it will be the default.

Steps to Reset your Samsung Security DVR

Samsung Security DVR Reset Procedure #1
  1. Reset the unit to factory by pressing both [MODE] and [PTZ] button for 5 seconds
  2. Then enter the 4321.
Samsung Security DVR Reset Procedure #2
  1. Reset the unit to factory by pressing both [MODE] and [CH2] button for 5 seconds
  2. Then enter the 4321.
Samsung Security DVR Reset Procedure #3 This reset will work on Android based DVRs only. All steps are performed on the device itself.
  1. Turn the device Off
    Wait 2 minutes
    Press and hold the following buttons
    • POWER,
    • HOME
    • VOLUME UP
  2. The unit should power on. Once it does, you can release power.
  3. Use the volume UP and Down buttons to select "Wipe/Factory Reset" from the recovery menu.
  4. Activate the reset using the HOME button.
    When the DVR goes through it's setup again, it will be at factory defaults. The password will be 4321.

Samsung Security DVR Reset Procedure #4 This reset will work on SDR models. It may also work on other models.
  1. With just the cameras showing, press the following in quick succession using the remote:
    • Freeze
    • Alarm
    • Freeze
    • Alarm
    • Freeze
    • Menu
    • Enter
  2. Make sure you press them quickly, one after the other. If it doesn't work the first time, try doing it several times. It can take many tries to get the timing right. If/when it works, you should get a screen that gives you the option to reset.
Samsung Security DVR Reset Procedure #5 This reset will work on SDR models where procedure #4 failed. It may also work on other models.
  1. Press the DVR Button to place the system in DVR Mode
  2. Press:
    • Freeze
    • View
    • Return
As with Procedure #4, you may need to press Freeze, View, and Return in in quick succession a few times to get it to work. The timing can be tricky.

Samsung Security Reset Procedure #6 Courtesy Sergio Ayala
To factory reset the SDR-B74301
  1. Reboot the DVR
  2. Once the DVR has rebooted, enter the following sequence on the remote:
  3. UP, RIGHT, 5, 3, 3
  4. You will be prompted to do a factory reset. Confirm
This has been confirmed by several people. Thank you, Sergio! If this works for you, please thank him in the comments below.
CCTV Networking Technical Support

Sep 18, 2017 | Samsung Home Security

1 Answer

Sentient DVR, model el821. How can I factory reset?


find the on board battery in the DVR remove it for 10 sec and plug it back this gonna reset your setting

Mar 31, 2016 | Home Security

2 Answers

I have a sentient cctv dvr from Maplin I can view it on my phone at home which is fine I wanted to know if I can view camera footage when I'm not at home etc. at work


Yes you can definitely view your CCTV footage on your mobile phone at your work via internet. Sentient CCTV DVR basically is a night vision camera. You must know the IP of the camera and IP Video server. Connecting your phone to CCTV camera via the protocol you can view the CCTV footage's in your phone. Night vision cameras are used for surveillance purpose. I would prefer cctv camera with ir illuminator for good image quality in the night time that will clear footage quality in my phone.
Recently many new applications have also being launched by security cameras with a view to solve problem you mentioned.

Jul 05, 2013 | Home Security

2 Answers

Samsung dvr 7162 need to reset password


please help me to reset password Samsung DVR SHR7162

Dec 24, 2012 | Samsung Shr-7162-15t Dvr Shr7162 Techwin...

2 Answers

When i reboot my Zmodo dvr I Can't get menu to come up or mouse to work HDD light keeps flashing,blinking hdd light,HDD indicator light


I had the same problem. Did their online tech support and Patty told me to hold down the "rewind" button on the DVR for 20 secs. You should now be able to right click your mouse to access the on screen menu. You will now want to go under system, and a/v setup and change the device to VGA instead of Vout. Now you can reboot and not have to go thru holding down the buttons anymore. Worked for me.

Oct 02, 2012 | ECHO1USA Zmodo 4 Ch Complete Dvr Kit -...

3 Answers

Reset kguard password


this will get you through the front door Please try this temporary password 519070 to login this will let you get to the admin pass word page so that you can change it i found it on cctv.com page but it takes 7 trys to load the cctv page so im going to post it here for safe keeping

Oct 24, 2011 | KWorld Kguard KG-SHA116 Video Surveillance...

2 Answers

My remote isn't working the mouse isn't responding no buttons are working on the dvr


Try pressing 0 on the remote. This locks and unlocks the screen for some reason

Aug 12, 2011 | ECHO1USA Zmodo 8 Ch Dvr 3g Mobile Usb With...

3 Answers

I changed the admin password on my sentient cctv dvr from the default 123456. I saved the changes but now get the message incorrect password when I input the six digit password I stored. Please help


Hello

After system boot-up, hold a right mouse click

button and there will be login window. Hold a left

mouse button to click the order of "Account", and

input correct account. Then left click the order of

"Password" and input correct password. At last

left click "Login" to enter system. There is one

factory-preset login "account/password"
"admin/111111" at admin level. The user can
use it to login the system for the first time

May 22, 2011 | Ganz DR4NC-160 DVR DIGITAL VIDEO RECORDER...

Not finding what you are looking for?
Home Security Logo

Related Topics:

785 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Security Experts

Brad Brown

Level 3 Expert

18165 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...