How do i put caller ID - NEC Ip2at-12txd Phone/telephone Handset black

Show my caller ID"
Press Phone.
Press the menu icon.
Press Settings.
Press More settings.
Press Show my caller ID.
Press Show number to turn on caller identification.
Press Hide number to turn off caller identification.
Press the Home key to return to the home screen.

The CID signal comes from your Dialtone carrier about 2 sec after the 1st ring. As you cannot identify what kind of phones you have it's impossible to know if your terminating equipment is able to decode it.

how to put the photos from caller in this phone

There's a setting under "initial setting", it allows you to adjust the talking caller-id setting on the base station. It bugged me for a while as well....having the base shouting the callers number as I was saying hello.

http://service.us.panasonic.com/OPERMANPDF/KXTG9331.PDF

for most problews, including caller id, follow these instructions in order:

Put the battery into the battery compartment and connect to the
connectors inside the battery compartment.
Connect the power adapter and telephone cord into matching jacks on the under side
of the base.
Plug the power adapter into the electrical outlet. Plug the telephone cord into the
telephone socket.

my caller id was not working, but everything else was. I followed the instructions above EXACTLY IN ORDER and the caller id is now working.

I just got off the phone with a GE rep, they said to unplug all phones from the wall for 15 minutes, then remove the batteries and put them back in the opposite way they came out. That will reset the system and fix the problem.

If it does not fix it, you'd need to purchase new phones.

Some network providers are having trouble with caller id. You need to be sure that friends or callers are not putting code for unknown caller. Automatically You receiving as unknown calls.
Check Your phone on setting caller id click on show.

Caller ID in the USA uses the FSK standard. For the most part, callerID in India uses DTMF (although I have heard of some FSK usage).

I am currently living in New Delhi and have an Airtel home phone line.My switch uses DTMF. I went to the Palika electronics bazaar (I awaysuse shop number 266 near gate 5, they seem to be a little kinder toforeigners as far as the "final price") and purchased an DTMF to FSKconvertor. My US phones now show caller ID information, although usingUS number seperations ### - ### - ####. I paid R500 but you couldprobably get it for around R400 if you are willing to put in the timebargaining. It looks like they are also available on Indian Ebay.

Mine says UST001B. It looks like these are low volume items becausethey stuck the components into a box marked "DSL Splitter" It works toconvert the caller ID as advertised.

How to get the caller ID to work on the additional GE DECT phone handsets. You must follow these steps in the exact order :
#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes. reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in.
It takes about another 10 minutes after that before all phone handsets start recognizing caller ID.

Caller ID in the USA uses the FSK standard. For the most part, caller ID in India uses DTMF (although I have heard of some FSK usage).

I am currently living in New Delhi and have an Airtel home phone line. My switch uses DTMF. I went to the Palika electronics bazaar (I aways use shop number 266 near gate 5, they seem to be a little kinder to foreigners as far as the "final price") and purchased an DTMF to FSK convertor. My US phones now show caller ID information, although using US number seperations ### - ### - ####. I paid R500 but you could probably get it for around R400 if you are willing to put in the time bargaining. It looks like they are also available on Indian Ebay.

Mine says UST001B. It looks like these are low volume items because they stuck the components into a box marked "DSL Splitter" It works to convert the caller ID as advertised.