Can I find instructions for sony remote controls online

The remote control code for Sony HBD-TZ510 home theater system may vary depending on the brand of the remote you are using. Here are a few common remote control codes that may work:

• 30158
• 31759
• 31939
• 31758

To program your remote, follow these steps:

1. Turn on your Sony HBD-TZ510 home theater system.
2. Press and hold the "Code Search" button on your remote control until the indicator light illuminates.
3. Press the "DVD" or "AUX" button on your remote to select the device you want to program.
4. Enter the four-digit code using the number buttons on your remote.
5. Press the "Power" button to test if the code is correct. The device should turn off if the code is correct.
6. If the device turns off, press the "Enter" button to save the code. The indicator light will turn off.
7. If the device does not turn off, repeat steps 4-6 with a different code until you find the correct one.

Note: If you do not have the original remote control that came with your Sony HBD-TZ510, you may need to purchase a universal remote control that is compatible with your device.

GE Universal Remote Codes ' Jasco

https://jascoproducts.com/support/ge-universal-remote-codes

Make a note of which version you have and replace the batteries and cover. A version 2 through version 4 remote will have a "V2" to "V4" after the model number. ... Programyour GE Universal Remote using the correct code list and instructions. ... Sometimes a code will allow limited function control (e.g. volume and channel ...

Universal Remote Control Codes

www.remotecodelist.com/

Codes and links for a number of universal remote controls, including Sony, RCA, ... If you have a remote for which you know the codes (or a web page that lists them) head to ... How to Program a GE Universal Remote Control .... look for your model of TV or VCR and find the online instructions that include the remote codes.

RCA Universal Remote Control- Target Programming ...

ok here is the link for the operating instructions . just click on Operating Instructions .

http://esupport.sony.com/US/perl/model-documents.pl?mdl=RMVZ220

Universal Remote Control Simple Setup

* Point it at a TV set and press the Mute/Power button. (Mute button if TV is already on, or Power button if the TV hasnt already been turned on)

* Keep pointing it at the TV until the TV turns on or muted, most TVs respond in about 5 seconds, the most is up to 20 seconds. (Other universal television remote you find in stores take minutes to program and enter long confusing codes)

* Once the TV is muted or turns on, simply let go of button and you have total control. You can use the remote as if you had the original remote, and responds instantly. ENJOY YOUR FREEDOM of choices with our remote!
Most remote controls require minutes of programming a universal remote code into each television while you read the confusing instruction manual.

go online and search for tv remote codes
there are manuals available
you will need the model number of your remote

Try holding down the tv power button and keep holding it while you press the channel button until your tv comes in.. It takes a few pushes. Make sure your tv is off first though.

go to www.sony.com. click on product support and follow from there. they have the manuals and instructions online.

just go here and choose the type of device and brand to get the code
then the instruction are towards the bottom of the page

electech

here ya go: http://esupport.sony.com/US/perl/model-remote.pl?mdl=RMY128