Symbol 6846 not associating with symbol 4131 AP

If your current controller can't see the AP, then the 1020 can only be reset through the Controller it was originally configured with. It doesn't have a console port, so you have to connect it to the old controller and run "clear lwapp private-config"

What do you need to know / what do you already know ? This is a large question.
1. Are all your access points configured
2. For your captive portal you could use MikroTik software. There is a large community based on the software and step by step instructions to setup a captive portal.

the issue is if your using bridge mode then you have to use differnt IP for both Router

if your main router using this IP like 192.168.1.1
second router sute use folowing IP 192.168.2.1

it will work changing IP's

To configure the terminal Ctrl-C to drop you to a DOS prompt then type cfg11 this will then take you a configuration screen where you can enter wireless and IP settings.

I can’t say about what program you are trying to load. If you get the system to associate then the next step is to configure the host settings.

FUNC-CTL-R at the Connect to Host screen

Password: system

Then you can add host settings.

It’s a shame we fix PDT6846's all the time and if we replace the board reconfigure them for the customer.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL 01202 620955

Try 10.1.1.1

There is a sound level setting in the configuration menu...contact Symbol/Motorola Support at 1-800-653-5350

Cheers.

Billy Barcode

You can connect a console cable to the console port and login using a freeware terminal emulation app such as Tera Term Pro. The default password is: Symbol

PDF manual:
http://www.guardit.cn/UploadFiles/symbol_ap4131_engmanual.pdf

Use chapter 5 for instructions on creating a new authentication key that will match your computer setting.

Hello minhaj,
You can download the structure manual of Sympol Spectrum 24 4131 by Clicking Here
Thank you for using FixYa.

Try 10.1.1.1

http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=3264502apdf&sliceId=&dialogID=6414057&stateId=0%200%206410315