At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
What burning software are you using? Does this happen any time you put a disk in, or only when you are trying to burn?What burning software are you using? Does this happen any time you put a disk in, or only when you are trying to burn?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Unable To Eject DVD From DVD-ROM Drive With The Eject The DVD-ROM drive will not open to release the DVD when the button is pushed on the drive. RESOLUTION:
Shut down the program that you are installing or running that uses the DVD-ROM drive.
Wait 10 to 15 seconds, and then open the DVD-ROM drive by pushing the eject button on the DVD-ROM drive.
If the DVD-ROM drive door still does not open, do the following:
Insert a paper clip or small pointed object into the small hole near the button on the DVD-ROM door.
Gently push in the paper clip until the DVD-ROM door opens.
Remove the CD from the drive.
To prevent the DVD-ROM drive from exhibiting this behavior again, follow these steps:
From the Start menu, point to Settings, and then click Control Panel.
In Control Panel, double-click the System icon.
In the System Properties dialog box, click the Device Manager tab.
On the Device Manager tab, double-click the CD-ROM category.
Double-click Toshiba DVD-ROM.
In the Toshiba DVD-ROM Properties dialog box, click the Settings tab.
On the Settings tab, clear the Auto insertion notification check box, and then click OK.
Insert a blank diskette into the floppy drive. Click start click on computer you should see all of you drives.
Right-click on Drive A. You will see the option to format the drive.
Click on Format. Depending on your operating system, you will see an option that reads either "Create a system disk" or "Create a MS Dos system disk." Click the box next to this option.
Click the "Start" button to begin formatting the disk. When completed, you will have a bootable floppy disk. For CD Rom or DVD disks
Open the software that you use to burn or write files to the CD-rom or DVD drive.
Click on "Make a Data CD or DVD." Insert a blank CD-R or DVD-R disk into the drive.
Look for the option to "Make this disk bootable." You may have to scroll over the various icons displayed to find this option. Click on the option.
Burn the CD or DVD as usual. Once completed, this disk can be used to boot your computer. hope this helps
you need a cdrw to write any data to a disk a cd-rom drive willnot burn a disk if you have a cd-rw and its not working
Click start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs
Click on Start, Run, and typeregedit and press Enter Click on the plus signs (+) next to the following folders
HKEY_LOCAL_MACHINE
SYSTEM
CurrentControlSet
Control
Class
{4D36E965-E325-11CE-BFC1-08002BE10318}
This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
Upper Filters
Lower Filters
Upper Filters.bak
Lower Filters.bak If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
After deleting the keys, close the registry editor Reboot your computer Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone
make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might bebad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall hope this helps if this does not fix the problem it might be a registry problem Close all open programs
Click on Start, Run, and typeregedit and press Enter Click on the plus signs (+) next to the following folders
HKEY_LOCAL_MACHINE
SYSTEM
CurrentControlSet
Control
Class
{4D36E965-E325-11CE-BFC1-08002BE10318}
This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
Upper Filters
Lower Filters
Upper Filters.bak
Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
After deleting the keys, close the registry editor Reboot your computer Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.
The easiest way, open your CD drive and with that open shut down your computer. Insert the Disk in the drive and close it then restart the computer. The installation program should start auto automatically as windows starts. The reason I said to shut down then reboot with the disk in the drive is to allow the program to scan your system before windows starts to speed up the install process. If you insert the Disk and close the drive while the computer is on it will auto start and scan the system anyway but it takes longer. Make sure you stop and uninstall any other anti virus programs or Anti Adware programs, such as Spy Bot, you may have running, the Adware programs only need to be closed.
Click on "Start" in the lower left-hand corner of the desktop screen. Then select "All Programs," "Accessories" and "Windows Explorer."
Open the DVD burner tray and insert a blank DVD or CD. Close the tray.
Navigate to the hard drive that has the files to be burned. Click on the files or folder to be burned, and drag to the DVD burner drive icon in Windows Explorer.
Select "File," then "Write these files to CD." Ensure that all the files that need to be written to the CD or DVD are on the list in the temporary files area that can be found in Windows. The CD writing wizard will open; follow the instructions in the wizard.
Remove the CD or DVD when finished and apply label. Close drive tray.
Use my computer and select the drive (eg drive E:). From pull down menu "File" select "eject". While the disk door attempts to open (hear slight movement of tray) massage the door with your fingers. This is done by smoothing out the across front door panel with your finger tips and pushing in and releasing pressure from door. Door should slide open partially and close again. Repeat. The eject button nearside the disc tray doesn't seem to work as well as selecting "File" and "Eject" from the menu. Something to do with the door cycle is less with the direct eject button.
it could be upper and lower filters in registry and system files, use a removal tool called filtercheck 4.6 in CDR-zone.com (goto the forums and search for filtercheck) after you downoad, run it, click yes to all filters found to remove. close program.
reinstall your preferred burning app (1 prog installed at a time and test burn) this is to replace the filter entry that was corrupt
I have the dv9000z. If I do NOT push the DVD drive tray all the way in until it CLICKS shut, then it OPENS again after 1-2 seconds. This is normal. I have found that most times when I close the DVD tray drive, I am not pushing it in far enough, because the top of the DVD tray is rubbing against the laptop's case. If I just press down VERY SLIGHTLY and push the DVD tray in, the tray will fully close and CLICK shut. This works for me. Good luck.
any time you put a disk in
any time you put a disk in
What burning software are you using? Does this happen any time you put a disk in, or only when you are trying to burn?
×