On the 79570323310, you first need to lower or remove the top shelf from the refrigerator. This will allow the water filter cover to drop down out of the way. Press the button on the front of the cover to release the cover and drop it out of the way. Next pull the water filter down completely before you pull it towards yourself to remove it from the manifold hole in the water filter housing. You may want to put a cup under the water filter cover while it is down to collect the water that will come out with the filter. Next remove the new filter from the carton and remove the protective filter. With the tabs on the filter held horizontal, push the new filter into the manifold hole at the same angle as the old one came out. Then push the front of the filter up until it is flat at the top of the refrigerator. Finally push the water filter cover up until it latches closed.
Sears Parts Direct has the manuals for many of their appliances online, the manual for the 79570323310 is here: http://www.searspartsdirect.com/partsdirect/user-manuals/79570323310-kenmore-parts-REFRIGERATOR-manual .
I hope this helps.
Cindy Wells
SOURCE: installing the water filter to my refrigator
Rotate the cartridge hand hold to a vertical position and PULL.
You may need to get pliers to grab with.
SOURCE: purchased a water filter for my estate refrigator and the ice maker stop working.
when you replaced the filter did you check the flow before installing. I have had filters actually clogged right out of the package. Also most filters have a flow direction indicated with an arrow on the filter
SOURCE: Kenmore refrig mod # 507920. Icemaker working
check to see if the hose going into icemaker is frozen. unclog it
SOURCE: No water coming from water dispenser.
It is possible the water control valve for that dispenser has failed and will not open. This happens a lot for those and the ice maker valves. All you need is the model number for your refrigerator and that will look like this for Kenmore. 213.564897 for example. and I will help you find the correct part number. Sea Breeze
SOURCE: I have a Kenmore model 795 77563600 refrig side
This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.
http://media.fotki.com/1_p,wkbwtkdqbqkgrkkxgtqsskgwtqkq,vi/ktfgsrbbdxktrrwffdr/1/1303472/5961857/image18067img-or.jpg
The ER IF code indicates a failure of the icing fan.
You may notice slower ice production but the other fans should be okay.
You can select the ultra ice option and see if the fan toggles on.
The fan or the control is bad.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
316 views
Usually answered in minutes!
×