9 years old great working order
SOURCE: LG Front-Load Washer WM2277HW ce sign
CE is an error stating that you have a problem with you board or possibly the stator on your unit. Either way your going to need service. You can ohm out your stator to see if it is the problem.
Check the back harness, maybe it has come loose, remove the back panel and it is the blue connector.
Sgt 48
SOURCE: LG WM-2277HW Front Load Washer not working with ce showing
CE is an error stating that you have a problem with you board or possibly the stator on your unit. Either way your going to need service. You can ohm out your stator to see if it is the problem.
Check the back harness, maybe it has come loose, remove the back panel and it is the blue connector.
Sgt 48
SOURCE: Problems with LG WM-2277HW Front Load Washer
It is a rare problem but I've seen it happen. The only way to resolve this issue immediately is to remove the top of the washer to gain access to the dispenser. The dispenser can be disassembled by unsnapping the top section where the hoses are connected. Once the top section is lifted, you can safely pull the drawer out. Not sure what happened but more than likely the water dispenser has warped downward causing it to jam the drawer. Recommend replacing the dispenser to resolve this problem.
SOURCE: LG WM-2277HW Front Load error code dE
de error code means the door is open. If code does not clear when door shut then could be door interlock or main pcb fault
SOURCE: How much does a broken thermistor typically cost?
THAT THING RARELY GO BAD. CHECK THE CONNECTIONS ON IT FIRST. UNPLUG AND PLUG CONNECTOR IN FEW TIMES. WHILE YOU DOWN THERE, PULL IT OUT COMPLETELY AND SEE IF IT COVERED WITH SOAP SCUM, GUNK, ETC. THAT WILL GIVE YOU FALSE READINGS AND GIVE YOU AN ERROR CODE FOR THE THERMISTOR
132 views
Usually answered in minutes!
×