My Nion3100 is saving pictures into "NEF" format instead of "JPEG. Don't know how it got switched or how to switch t back. Can I re-format the pic on my SD card so I can work with them on the computer. How do I get the camera to save photos in jpeg?
Ok, pay attention, this is easy Go to menu, then shooting menu then image quality and you set it for Jpeg normal and your set. Nef is for the best quality possible jpeg is for regular shooting . Have fun
Open the "Shooting Menu" by pressing the Menu button. Press the right Multi-selector and then scroll up or down to "Image Quality". Press the right Multi-selector and you will see the various choices for JPEG and NEF combinations and quality, make your selection by scrolling up or down and pressing "OK".
As for converting you NEF photos to JPEG; you can easily do that in one of several ways on your computer. If you are using Lightroom or Photoshop, all you have to do is open your pictures, select "Save As" and use the pull-down menu to select JPEG and save. If you do not have that program, there are several conversion programs available on the Web; manu for free. I use a program called BatchConverter on my Mac. There are similar programs of PCs.
SOURCE: trouble capturin NEF + basic - in writes two jpegs on the card! no nef...
alexroska, Shooting tethered to a PC for instant viewing/downloading? I'll have to try that, it's not the card, probably just a glitch from being tied to the PC - and yes you can reset and start from scratch again from the menu settings. try that first before the firmware which is a last resort. randy320sgi
SOURCE: i cannot print pictures taken in nef format. Can
Hi dear, most printers can only use jpeg or bmp format .Use Irfanview to convert raw file to either one.
151 views
Usually answered in minutes!
×