<!-- from fixya rte -->Why won't the display turn on - Proform Perspective Es Treadmill PFTL99806

What burning software/version are you using?

Turn off machine and check water waste filter to see if blocked should be at front at bottom of machine or at back,not sure this is the cure but hope it helps

Check the wall outlet has poser and make sure the plug is fully inserted.

first I would check to make sure the computer is hooked up properly if so then it may not be any good.

it sounds like it's a problem with the computer motherboard and the
machine needs to be checked

Yep, not enough amps to engage the starter clutch, and when ti does engage, not enough amps to turn the engine. You need a 12 amp battery.

try to hold your power button and home buttom at same time or 1 min it will rebooth it

Try a different mains adaptor of the same spec. It's likely that.

(I used to post on here with tips under a different user name. I can't login anymore as that name, Mr F of Herts.)

will it play? you may have blown an internal fuse in cd player,

You go to dealers parts counter & have them put
what you want on the display & turn it so you can
point to what you want or write down parts #'s

You really shouldn't need any of that to repair your
vehicle.
An Auto Parts Store can do the same thing & you
can go behind the counter & check out parts
on their computer

The parts store won't use any dealer numbers at all