I reset this and now it doesnt connect to my belkin router

call the 24 hour support line.

http://www.belkin.com/support/

I would suggest you reset the router once. To reset the router , please follow the instructions in the link below.
http://en-us-support.belkin.com/app/answers/detail/a_id/48
If the router doesnt respond, then time to get a replacement. Please call Belkin Support and am sure they can help
Thanks Ranjit

Well the best shot is to reset the router back to factory by pressing the reset button for 10 seconds then it will flash a couple of times. then see if your laptop can connect to the router, If that doesnt work let me know

* there are 2 different types of reset one is hard reset and the other soft one * the hard reset u need a paper clip press the reset hole for more than one minute -- u need to feel the click when u press the reset hole --- if not then the reset button is not functioning * the soft reset is u need to login inside router using 192.168.2.1 in the address bar of ur browser and click on restore factory settings which is under UTILITIES on the left side * if still doesnt work u need to update the firmware in belkin.com/support

If the red light is your DSL light it means you have a line fault or no internet connection. Contact your provider

If the red light is your broadband / internet light - it means you are not logged on properly. Chck your username and password are correct - especially after the reset!

http://www.belkin.com/support/article/?lid=en&pid=F5D7230-4&aid=1564&scid=0 reset to factory defaults and reset up your laptop All info at factory website here at this web address.RICHARDM69

What is the brand of the router your using? This information will be from the router that you have. Use a wired connection from the router,check your default gateway (ipconfig) and type that numbers in your address bar. You will be able to access your set-up page, look for wireless tab and look for wireless security. You will see there your WEP key.

Try resetting the router and starting again as a first step.

Locate the reset button on the back and hold for 30 secs (you may need a pin as it is tiny)

If that doesnt fix, ring Belkin as its may be faulty.

:0) x