Peavey PV215 Speakers

Dj. NICE!
PeaveySP 6 4 Way Dual 15 Speaker

PEAVEY SPEAKERS

Amazon com Peavey PV215 2 Way Dual 15 Inch Speaker Cabinet Musical...


Peavey com

does this speaker make this noise when it is on with nothing plugged into it?

Are talking about a lamp in the crossover module...?

You have likely almost but not totally fried a voice coil in your speaker. Most speakers get cooked from underpowering, not from being overdriven. What are the speakers rated for and what are you driving them with?

Check for impedance ( resistance) in ohms on the speakers disconnected from the circuit using a volt/ohm meter. I think the woofers are 8 ohms and the tweeters are 8 ohms. Also check for bad solder joints where the jacks are soldered to the circuit boards.

hey, just picked up a pair of used peavey impulse 200p speakers .. one of the speakers is giving out this very loud high pictched hum (obviously not working). can anyone help or advice, thanks

Hi..

I've worked on similar units.
Things I'd check first :
Dust in the unit.
Weak solder connections /crusty debris stuff on the input jacks or output terminals
Any flex cables soldered in tend to be a problem on peavey amps I resolder all those contacts.
Checking the amp w/o a load IS NOT a good suggestion.
What style output connections are you using?
1/4 inch, binding post, or Neutrik style?

depends who assembled the speakers as to wheather or not there is any fuse proetection installed.
The drivers are probably gone from the highs because of overloading power surge on the same circuit as the cash register,
or
the crossover is failed.

Cheap fix is replace crossover
expensive fix replace cones of speaker

Best long term protection is to split up the power loading on the stage and surge/spike guard power boards for staging equipment & have resettable fuses installed at the crossobvers or the respective speaker connections.

1.FUSES ARE PROTECTION<
2.THEY BLOW FOR A REASON<
3.PROTECTING THE SPEAKERS<

does it powered on? any bass at all?