<!-- from fixya rte -->Alarm says to empty container - Dryers

hi,
you just want to off the alarm so open the wirring of your alarm which is located inside the seat just open it it contain the switch or or it contain plough just off it or wicth off and now your alarm get dissable please vote and i am giving you some pic also

Alarm LED:
• Permanently on (one or more causes): No coffee left, water tank is empty, empty the residual water
tray is full (in this case the dreg drawer also has to be emptied to prevent problems).
• Flashing slowly (one or more causes): Brewing unit is missing, dreg drawer has not been inserted,
coffee container cover has not been inserted, service door is open, rotary knob for opening the hot
water / steam is not in the right position.
• Flashing rapidly:Ventilate the water system

Yank out the condenser and wash it out is what I would try. Check the switch on the container chamber for correct positioning.Use this SERVICE MANUAL

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

I had this issue and the answer above about tipping your dryer / cleaning the condenser worked a treat for me. So thank you to whoever posted it. And don't forget to clean your filter, bottom front, regularly. I keep forgetting this and am sure it probably contributed to the problem.

Try to clean/wash the waste container. If that still not working the sensor needs to be replaced.

U1 alarm is related to an issue with filling water into the dishwasher. If there is water already in the dishwasher you will need to empty it manually with a small container. Check if the sprayer arm is moving freely. You should turn off the mains supply power and water before you attempt the above procedure. It is possible the solenoid controlling the water inlet into the drawer is faulty. This will be evident if you hear a click but no water is coming in.

check your battery because if its deade your car may show diffrent alarms

try emptying the water container it will set an alarm off. that wil shut if off that abruptly.

just e-mail me if you need additional assistance.

sounds like your condensin pump is leaking and triggering the over flow micro switch not a job 4 a novice call an engineer good luck