MY PIP BUTTON IS NOT RESPONDING WAT SHALL I DO MY MOVIE SCREEN IS TOO SMALL.

Your TV is in Picture in Picture (PiP) mode. The small picture is the previous live input. The bigger dark area is the current input where there's no live source.

Find the PiP button on the TV remote or via the TV's menus. Press PiP a number of times to cycle through the options. Stop when the picture is the size you want.

Have a read of your TV manual. Stuff like this is detailed in there.

Replace it

Is it playing in PIP box ? If so switch it.

Hello, it's not PiP that's on , it[s a closed caption issue. the CC is in the text mode and is an easy fix. just press the CC button on the remote (it's located above the 1 button) till it says off on the tv screen, or if you use closed caption select CC1. this should take care of your problem......thanks, Terry

seems you have found the PiP (Picture in Picture) if you still have the orignal remote press the pip button or the cancel button

Try to use other dvd movie, if the movie play's normal try to focus in to your digital receiver their maybe only a loosed connection specially the input and output of your digital receiver.

There is a small button on top when the screen closes it turns off the display. While the movie is playing press the small button with a small pointing object and see if the display shows something on the screen for a few second and then off (you can sometime see the movie playing but very dim). then there is a problem with the switch not switching the display back to normal. Hope this helps...

picture in picture means you will need a second input for PIP to work. For example you are watching a movie on a dvd player thru the bravia if your antenna is also connected that becomes your second input. Therefore when you select PIP a small screen will appear and you will be able to see the channel that was last set on that screen... hope this helps

The PIP (picture-in-picture) setting can easily be reversed if you look on your tv for the PIP button or for the same button on your remote. If neither of these works then you may want to check your TV's operation manual for the PIP setting .

i am not familiar with this model, but on most sets you will have a button on the remote to activate pip, when active you should be able to adjust channels on the small display with the remote and cycle through inputs. depending on the tv you will either have 2 inputs for your cable/sat/tv feed, or will have 1 with a dual tuner.
check the connections in the back for a second cable input, or hook up a dvd/vcr/game console/etc to test the pip.
start dvd or tape playing, press pip button to display the mini-screen, then use the tv/vcr or input button to cycle through the modes and see if one pops up. most tvs that have pip will also have a swap button on the remote, it may be labeled with text, or it may just look like one screen overlaying another, press that one to swap between displays.

hope this helps,
trin