Blanket not heating up and the controller light is flashing.
The flashing red light is designed to notify you in the event that
a problem has been discovered by flashing the light on the base unit.
Before resetting the unit. First, check the blanket/mattress
pad for visual damage.
If no visual damage is found, unplug the system from wall outlet.
Check that the base unit is well connected to the module. Plug the power cord into the wall outlet. Set the base unit to "On." If the system still does not operate after two or three times trying to reset, disconnect the power cord and get it checked out by a specialist!
Make sure that the 2 arrows are on the same side and facing each other.
Washed blanket and then plugged it in power was already on and light on control was blinking on high. Power button made no change. Unplugged unit from power - unplugged blanket then plugged blanket control back in and then plugged to unit to power. Blanket is now working fine
9,047 views
Usually answered in minutes!
×