WHAT IS ERROR CODE H5 FOR A FRIGIDAIRE HEAT/COOL WINDOW UNIT?

The H5 error code in a Blue Star split inverter AC typically indicates that there is a problem with the outdoor unit. The outdoor unit is the part of the air conditioning system that is located outside the building and is responsible for releasing the heat absorbed from the inside of the building to the outside.
There are a few possible causes of the H5 error code:

1. The outdoor unit's compressor might be malfunctioning. The compressor is the most important component of the outdoor unit and is responsible for compressing and circulating the refrigerant.
2. The outdoor unit's fins might be dirty or obstructed. The fins are the thin metal blades that are responsible for releasing the heat absorbed from the inside of the building to the outside. If the fins are dirty or obstructed, the heat exchange process will be impaired, resulting in the H5 error code.
3. The outdoor unit's fan motor might be malfunctioning. The fan motor is responsible for turning the fan blades that circulate the air over the fins. If the fan motor is not functioning properly, the H5 error code will be displayed.

To troubleshoot the H5 error code, you should start by checking the outdoor unit for any visible signs of damage or obstruction. If you do not see any obvious problems, you may need to call a professional HVAC technician to diagnose and repair the issue.

The system is unidentified! Error codes differ among brands. That said, see if the fan is running, if not, you have to troubleshoot the fan. The outside coil may be dirty. A wire may be overheating., If it had time to cool down, switching it off and on again offered temporary relief. If you can clean the coils, that may fix the problem. If the fan is on for some time and no overheating is occuring after cleaning it and you see no H5, you are fairly secure. You can do the risk benefit calculation. Fact is, H5 can appear for several reasons. If cleaning stops that, problem solved.

You have a choice call for service or go without AC. Your choice. there are no DIY repairs on unit.

Ive seen ES, in two sites http://www.doityourself.com/forum/air-conditioning-cooling-systems/532071-frigidaire-ac-window-unit.html
http://www.searspartsdirect.com/window-air-conditioner-repair/error-codes/frigidaire-window-air-conditioner-error-codes.html So I'd tend to agree with the majority.

Gree AC IM getting H5 error code.. how can I fix it?

H5-1 means, the copier jammed more than 2 times at the fuser unit. Check the unit if any the fingers are ok, check if the fuser gear is ok. Inspect if fuser rollers condition. Once you figuer out the problem, you need to reset the error code. The procedure of resetting error codes depends on the model.

hi,I have error code L h on my coppier sharp 5516. your help please.

when your copier paper jam in fuser unit area. than show H5-01 error code.
if you fix it self,open right door and relese the jam paper carefully.

H5 doesn't show up on the service code manual. However, all error codes beginning with 'H' are related to the fuser, this is the heating portion of the machine. Be careful if it still prints despite the error code, you may damage the unit. It should be looked at by a service rep.